RC Slope Soaring in Hong Kong

A forum for rc sailplane pilots
It is currently Sat Jun 27, 2026 8:58 pm

View unanswered posts | View active topics


Board index » R/C Soaring, 遙控滑翔飛行 » General topics 任何議提

All times are UTC + 8 hours




Post new topic Reply to topic  Page 1 of 1
  [ 15 posts ] 
  Print view Previous topic | Next topic 
Author Message
TLK
PostPosted: Wed Aug 01, 2007 12:48 pm 

Joined: Sun Dec 03, 2006 12:48 pm
Posts: 18
http://www.canterburysailplanes.co.nz/i ... m/PC9.html http://www.canterburysailplanes.co.nz/i ... stang.html 小弟係超級新手.唔知PC9 同 Mustang 合新手玩嗎? 這2架機可以邊到買到? 幾$左右??? 新手玩問題大嗎? 2架邊架比較好. 謝謝師兄
Top
 Profile  
 
ming yyy
 Post subject:
PostPosted: Wed Aug 01, 2007 9:55 pm 

Joined: Fri Feb 23, 2007 11:21 pm
Posts: 9
兩個都合新手玩,但Eraser較佳,全部德昌可買到,大約$630,Good fun!
Top
 Profile  
 
TLK
 Post subject:
PostPosted: Fri Aug 03, 2007 9:36 pm 

Joined: Sun Dec 03, 2006 12:48 pm
Posts: 18
睇左幾日都係比較喜歡Multiplex Easy Glider
http://www.modelspot.com/mpx/easyglider.htm
這隻是否識合新手? 使唔使比較大風先玩到?
德昌能買到嗎? 價$大約幾多? THX各位師兄
Top
 Profile  
 
CM Cheng
 Post subject:
PostPosted: Fri Aug 10, 2007 8:53 pm 
User avatar

Joined: Thu Feb 26, 2004 5:08 pm
Posts: 3117
Location: Hong Kong
Hi TLK,

我有同事用 Canterbury 的 PC9 和 Split Fire(=Mustang) 來學飛，我兩隻都借來飛過，感覺差不多，呢D機本身設計係做動作，反應算快同好靈活，雖然唔及"傳統學飛"要求慢及定，但我覺得用來學飛都OK，特別係EPP材料撞唔爛及安全。

Canterbury D 機要落刀切，工序稍多，但都算易砌。

Easy Glider 係 Multiplex 出品，質量一定好，佢材料叫Elapor，介乎PS發泡膠與EPP之間，好耐用(但不及EPP)，我自己都有隻 Multiplex 的 Elapor 機，全部零件都係 mold 出來，非常準確同易砌，一定成功！

Easy Glider 我未飛過，但睇設計應很適合用來學飛，Easy 比 PC9 同 Mustang 更適合飛細風，也可參考台灣朋友對它的評價:

http://www.efly98.com/cdb_efly98/viewthread.php?tid=39492&fpage=1&highlight=%AEe%A9%F6%B7%C6
http://www.efly98.com/cdb_efly98/viewthread.php?tid=39586&fpage=1&highlight=%AEe%A9%F6%B7%C6

德昌係Multiplex代理 :P
Top
 Profile  
 
joe1130
PostPosted: Sat Aug 11, 2007 5:01 pm 

Joined: Wed Dec 20, 2006 1:50 pm
Posts: 148
Image
Image
Top
 Profile  
 
TLK
 Post subject:
PostPosted: Mon Aug 20, 2007 6:57 pm 

Joined: Sun Dec 03, 2006 12:48 pm
Posts: 18
前10日買架F20.小弟係第一次玩Glider.返到屋企好開心係咁整.但整左2日整到七七八八 到整servo既時候發現D位係極道唔合.....要左「界界」 右「界界」 整左半日D位合啦 入servo set機啦 但唔知點解D servo 係咁打冷震.......真係有D灰心呀>.<..... 有無師兄可以解答我點解servo會係咁打冷震? 點先可以解決@@?
Top
 Profile  
 
Stanley
 Post subject:
PostPosted: Mon Aug 20, 2007 7:19 pm 
User avatar

Joined: Thu Feb 26, 2004 3:51 pm
Posts: 3733
Location: Hong Kong
TLK wrote:
前10日買架F20.小弟係第一次玩Glider.返到屋企好開心係咁整.但整左2日整到七七八八 到整servo既時候發現D位係極道唔合.....要左「界界」 右「界界」 整左半日D位合啦 入servo set機啦 但唔知點解D servo 係咁打冷震.......真係有D灰心呀>.<..... 有無師兄可以解答我點解servo會係咁打冷震? 點先可以解決@@?


打冷震係有好多原因。你推個控的推桿有沒有反應？如果有反應，即係話接收ok，如果唔係，你個控可能同個接收唔夾，pcm控fm接收的話D servo就會打冷震。如果控有反應servo會育但打冷震，咁就可能D servo有問題。
Top
 Profile  
 
TLK
 Post subject:
PostPosted: Mon Aug 20, 2007 8:16 pm 

Joined: Sun Dec 03, 2006 12:48 pm
Posts: 18
個接收係之前用開的.之前用於三角機完全無問題. 現在反應有DD..唔太大....主要係servo 左右左右係咁打冷震.......
Top
 Profile  
 
Stanley
 Post subject:
PostPosted: Mon Aug 20, 2007 10:27 pm 
User avatar

Joined: Thu Feb 26, 2004 3:51 pm
Posts: 3733
Location: Hong Kong
TLK wrote:
個接收係之前用開的.之前用於三角機完全無問題. 現在反應有DD..唔太大....主要係servo 左右左右係咁打冷震.......


比多少少資訊至可以了解問題出處架！

你插
Top
 Profile  
 
Steven Kwok
 Post subject:
PostPosted: Mon Aug 20, 2007 10:37 pm 

Joined: Mon Jan 17, 2005 5:52 pm
Posts: 56
check to see if the receiver battery is fully charged
Top
 Profile  
 
TLK
 Post subject:
PostPosted: Tue Aug 21, 2007 11:58 am 

Joined: Sun Dec 03, 2006 12:48 pm
Posts: 18
我用2隻s3003 1.2V電x4 『電池箱』 我set機個時係用Am既MJ槍控 . 『D行程 .反應完全無問題 』 .但一轉返用JR9X 控 同接收之後 2個Sevro就係咁震 .但有小小反應...但反應極慢......
Top
 Profile  
 
CM Cheng
 Post subject:
PostPosted: Tue Aug 21, 2007 12:13 pm 
User avatar

Joined: Thu Feb 26, 2004 5:08 pm
Posts: 3117
Location: Hong Kong
9X is FM, and your receiver is AM!!! That's why they are not compatible.

Hi TLK, do you know that there are AM, FM-PPM , FM-PCM and the latest 2.4G SST radio system in the market? Stanley has an excellent tutorial on the RC sailplane and radio. Maybe you'd better refer to it first :)

http://www.rcsail.com/helpfiles.htm#RC%20equipment
Top
 Profile  
 
TLK
 Post subject:
PostPosted: Tue Aug 21, 2007 12:47 pm 

Joined: Sun Dec 03, 2006 12:48 pm
Posts: 18
我係用個FM接收的 之前用開的.完全無問題.但現在唔知點解出左問題 :shock: :(
Top
 Profile  
 
CM Cheng
 Post subject:
PostPosted: Tue Aug 21, 2007 1:07 pm 
User avatar

Joined: Thu Feb 26, 2004 5:08 pm
Posts: 3117
Location: Hong Kong
Your 9X can be switched between PPM and PCM. From you description I think your receiver is a FM (PPM) and your 9X is set to PCM.
Top
 Profile  
 
TLK
 Post subject:
PostPosted: Tue Aug 21, 2007 5:44 pm 

Joined: Sun Dec 03, 2006 12:48 pm
Posts: 18
謝謝師兄 :D 問題已經解决..原來真係未Set PPM :D thx
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 15 posts ] 

Board index » R/C Soaring, 遙控滑翔飛行 » General topics 任何議提

All times are UTC + 8 hours


Who is online

Users browsing this forum: No registered users and 74 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

RASAIL Home

 WindGURU at Ma On Shan, Clearwater Bay and Fei Ngo Shan

Powered by phpBB® Forum Software © phpBB Group