Hong Kong RC Sailplane Forum 香港滑翔機發燒友論壇

This forum is dedicated to r/c sailplane enthusiasts 此論壇專為遙控滑翔機發燒友而設
It is currently 16 Dec 2017 01:11 pm

All times are UTC + 8 hours




Post new topic Reply to topic  [ 10 posts ] 
Author Message
PostPosted: 04 Nov 2004 09:47 pm 
User avatar

Joined: 26 Feb 2004 07:54 pm
Posts: 1660
Location: Tai Po, HK
各位師兄,

我隻 NYX 既尾板,依家係用 Futaba 既 3102 servo 。
行得好慢,又唔夠力!

我想搵個速度快、大力、回中又準確既。
Size 大少少都重可以 fit 得入個機身。
貴少少都可以,但係又唔好太貴!最好唔超過2個3102既價錢啦!

對 HiTec 既 servo 冇信心,唔駛提。

有冇邊個有好建議?係邊度買得到!


注: CM 講嗰位破40秒,而要換 servo 既人唔係我。Ah Pong, 你揾到你想要既手指未呀?


Top
 Profile  
 
 Post subject:
PostPosted: 04 Nov 2004 09:55 pm 
User avatar

Joined: 26 Feb 2004 05:31 pm
Posts: 741
Location: 沙田
阿麥﹐我好多年前買左隻 Eagle 直升機﹐但未砌好就已經賣左﹐依家留低個 JR NES 4000 super servo, 係 digital, 專俾直升機 rudder 用﹐合用既可以囉去﹐好過擺係度發 mo


Top
 Profile  
 
 Post subject:
PostPosted: 04 Nov 2004 10:44 pm 
User avatar

Joined: 03 Mar 2004 07:31 pm
Posts: 1023
:P Hey CM,
I went to FNS today be coz the easterly wind was strong. I played with the Chinese Sting, which got flutter when DSing as well. May be she felt too tired in recent weeks, and dushed into the slope with a view to finish her life. However, I will try my best to save her in my ICU (intensive care unit in my home).

Ah Mak,
I already found the best fingers. They are my thumbs that were given by my late father!

Regards, and happy F3F!! :P

By the way, CM. If I could not save my Chinese Sting, Please order a Demo for me.


Top
 Profile  
 
 Post subject:
PostPosted: 04 Nov 2004 10:55 pm 
User avatar

Joined: 26 Feb 2004 03:51 pm
Posts: 3626
Location: Hong Kong
Ah Pong, some of us will go up to Shek O to practice F3F on Saturday. If you and Ah Wai are interested, come along and we might get enough people to run a mini F3F!


Top
 Profile  
 
 Post subject:
PostPosted: 04 Nov 2004 11:01 pm 
User avatar

Joined: 26 Feb 2004 05:08 pm
Posts: 2944
Location: Hong Kong
Ah Pong. No problem, let me know if your 神州史汀 is certified dead. Have you got the "permit" from your wife?

( . . . I think it is not necessary. Everyone knows you have a good R/C wife who supports your hobby. BTW, a few days ago I talked with Master F.Fai and we think that the best R/C wife is not the one who likes flying, but likes building and repairing : :wink: )


Top
 Profile  
 
 Post subject:
PostPosted: 04 Nov 2004 11:32 pm 
User avatar

Joined: 26 Feb 2004 07:54 pm
Posts: 1660
Location: Tai Po, HK
Thank you YC,

如果個 NES-4000 servo 係直升机用既話,咁就大咗D啦!
個servo比3102大些少都重得,Standard size 就太大了。
如果放得落既話,我希望連個 rudder 都換個快D既servo!
VR個47号南司拉夫机手隻 Sting D servo 好快,唔知係邊隻牌子既呢?


Top
 Profile  
 
 Post subject:
PostPosted: 04 Nov 2004 11:32 pm 
User avatar

Joined: 26 Feb 2004 03:51 pm
Posts: 3626
Location: Hong Kong
Quote:
the best R/C wife is not the one who likes flying, but likes building and repairing :


In my opinion, apart from the normal duty as a wife should do, the best R/C wife should also:

buy and pay for the planes you realy love to own,

(optional) build the planes and install r/c gears for you,

prepare the stuff you need before you go for flying, such as; food, clothing, drink, sunglass.. so on. She would never forget to charge your planes' batteries and get the needed accessories in the tool box,

go with you to fly and take care of every aspect including carrying the planes up to the hill, assemblying the them and getting them ready for you to enjoy,

recover your crashed plane in case if there is a misfortune and also be tolerance to your bad "habit" after the crash!

repair your damaged planes in a limited of time and get them ready again as soon as possible,

encourage you to participate in r/c contest and be ready to sponsor you for oversea trips,

Any other thing I missed?

Over the years I've seen some people wifes do have some of the above criteria, but never found one that has them all.

My dream are going on!


Top
 Profile  
 
 Post subject:
PostPosted: 04 Nov 2004 11:50 pm 
User avatar

Joined: 26 Feb 2004 07:54 pm
Posts: 1660
Location: Tai Po, HK
Stanley wrote:
Over the years I've seen some people wifes do have some of the above criteria, but never found one that has them all.

My dream are going on!


Stanley,

有齊以上條件既 "RC老婆" 睇怕都唔易揾。
反而咁既 "RC老豆" 就可能性大D!

各位師兄,好快D帶你老豆黎玩 RC soaring 啦。 有著數口架 :D


Top
 Profile  
 
 Post subject:
PostPosted: 05 Nov 2004 12:10 am 
User avatar

Joined: 26 Feb 2004 05:08 pm
Posts: 2944
Location: Hong Kong
阿麥你自己就已經係 "RC老豆" 既典範 :o


Top
 Profile  
 
 Post subject:
PostPosted: 05 Nov 2004 12:46 pm 
User avatar

Joined: 26 Feb 2004 06:07 pm
Posts: 632
Location: Hong Kong
Quote:
我隻 NYX 既尾板,依家係用 Futaba 既 3102 servo 。
行得好慢,又唔夠力!


I think Futaba S9650 Digital Mini Servo is quite suitable for your application. Here is the specification:

Length:
43mm between centers of side mounting holes
35.5mm servo body length
42.5mm between the centers of standard mounting holes
Width: 15mm
Height: 28.6mm
Weight: 0.92oz (26 grams)

SPEED:
0.14 sec/60degrees @ 4.8V
0.11 sec/60degrees @ 6.0V
TORQUE:
3.6kg-cm @ 4.8V (50 oz/in @ 4.8V)
4.5kg-cm @ 6.0V (62.5 oz/in @ 6.0V)

I am using Futaba 3002 which is about the same size but much slower. Thus, it should be able to fit into your NYX.

I don't know the price in local shop. It should be around HK$500-600 if you order from internet.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC + 8 hours


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

RCSAIL Home

WindGURU at Ma On Shan, Clearwater Bay and Fei Ngo Shan

Powered by phpBB® Forum Software © phpBB Group