Hong Kong RC Sailplane Forum 香港滑翔機發燒友論壇

This forum is dedicated to r/c sailplane enthusiasts 此論壇專為遙控滑翔機發燒友而設
It is currently 19 Oct 2017 08:11 am

All times are UTC + 8 hours




Post new topic Reply to topic  [ 64 posts ]  Go to page Previous  1, 2, 3
Author Message
 Post subject:
PostPosted: 06 Nov 2006 06:22 pm 
User avatar

Joined: 12 Jan 2005 12:20 pm
Posts: 1006
Location: Shatin (Tai Wai)
Hey Stanley : just a minor typo in the score sheet ! Ah Mak was flying Ocelot yesterday (same model as Angus) which performed extremely well in light lift condition with her slim body & super light configuartion :o

Like F3F Open last year, NOV seems a fortunte month for Pong Pong for demonstrating his top speed :x


Top
 Profile  
 
 Post subject:
PostPosted: 06 Nov 2006 10:14 pm 
User avatar

Joined: 26 Feb 2004 03:51 pm
Posts: 3619
Location: Hong Kong
昨日真是我的超級黑日了,一早上到馬鞍山停車場,我架車的前後輪軩,給幾口大頭釘插穿,要立刻趕落山保


Top
 Profile  
 
 Post subject:
PostPosted: 07 Nov 2006 01:16 am 
User avatar

Joined: 26 Feb 2004 05:31 pm
Posts: 741
Location: 沙田
阿生為左避個傘佬﹐搞到隻 mini NYX 跌左落山﹐執唔返﹐唉....出師未捷....阿生好似有D睇唔開 …
Image


呢隻好似係冠軍機
Image


李民隻 mini NYX 好似動過大手術。 有D似鍾無艷同科學怪人
Image


Image


法國仔
Image


Image


Image


Ocelot 好靚仔
Image


Image


Donny 隻紅 Banana 好 sharp

Image


Image


Image


不過我都係最鍾意阿麥果隻充滿蒼桑感既 mini Corado
Image


Image


Image


Top
 Profile  
 
 Post subject:
PostPosted: 08 Nov 2006 09:36 pm 
User avatar

Joined: 03 Mar 2004 07:31 pm
Posts: 1020
:P



Stanley,

Quote:
現在正稠悵如何把螺絲弄斷,然後鬆脫隻翼。請問各位仁兄有無其他可行之方法?誰人會有一把幼細的線鋸借用把螺絲鋸斷,之後再重新安裝絲模。隻機翼不能拆開,好左地方,老婆已經好不耐煩!請速幫忙解決!


Don't worry.
Send her to my ICU. I'd reserved a bed for her.

:P :P


Top
 Profile  
 
 Post subject:
PostPosted: 09 Nov 2006 12:52 am 
User avatar

Joined: 26 Feb 2004 03:51 pm
Posts: 3619
Location: Hong Kong
Ah Pong wrote:
:P





Don't worry.
Send her to my ICU. I'd reserved a bed for her.

:P :P


Thanks Ah Pong, I will send it to your ICU if I cannot find a small saw to cut the screw this weekend.



I was just too busy to fix the plane and no time to write up the report. Now, I have giving up and here is the report.
http://www.hkrcss.org/F3F60in1105-06.html
http://www.hkrcss.org/F3F60in1105-06C.html


Last edited by Stanley on 09 Nov 2006 06:29 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: 09 Nov 2006 11:49 am 
User avatar

Joined: 26 Feb 2004 07:54 pm
Posts: 1660
Location: Tai Po, HK
Stanley wrote:
隻機翼不能拆開,好左地方,老婆已經好不耐煩!請速幫忙解決!
:x


建議你可以"金屋藏嬌"。
租個貨倉收藏你 D 愛機吧!

買左新機冇人知,去放機又唔駛帶機出門!
一舉兩得。


Top
 Profile  
 
 Post subject:
PostPosted: 09 Nov 2006 06:36 pm 
User avatar

Joined: 26 Feb 2004 03:51 pm
Posts: 3619
Location: Hong Kong
K.Y.Mak wrote:
Stanley wrote:
隻機翼不能拆開,好左地方,老婆已經好不耐煩!請速幫忙解決!
:x


建議你可以"金屋藏嬌"。
租個貨倉收藏你 D 愛機吧!

買左新機冇人知,去放機又唔駛帶機出門!
一舉兩得。



我現在只是在 F 階段陪徊!
http://www.rcsail.com/forum/viewtopic.php?t=836&sid=1c83a6701facab7ce576f448db5c1dfb

依你所說我咪要進入第 E 階段? :cry:


Top
 Profile  
 
 Post subject:
PostPosted: 09 Nov 2006 07:12 pm 
User avatar

Joined: 03 Mar 2004 07:31 pm
Posts: 1020
:shock:

Quote from newspaper today:

【 本 報 訊 】 兩 批 同 屬 一 個 黑 幫 的 青 少 年 疑 因 「 眼 超 超 」 問 題 , 較 早 前 發 生 小 衝 突 後 , 前 晚 竟 互 相 「 吹 雞 」 在 粉 嶺 雍 盛 苑 大 廝 殺 , 造 成 4 人 受 傷 , 其 中 一 人 後 腦 重 創 至 今 仍 昏 迷 不 醒 。 警 方 事 後 拘 捕 7 人 , 包 括 一 名 黑 幫 小 頭 目 「 歪 文 」 , 警 方 正 追 緝 另 一 小 頭 目 「 肥 輝 」 助 查 。
大 埔 警 區 刑 事 總 督 察 XXX 形 容 : 「 根 本 好 無 聊 … … 兩 班 人 因 為 互 睥 (F3F ???) 結 怨 … … 是 一 單 由 細 變 大 的 毆 鬥 事 件 。 」
被 捕 11 人 包 括 4 名 傷 者 年 齡 由 15 至 22 歲 , 其 中 兩 人 為 中 二 及 中 四 學 生 , 各 人 涉 嫌 聚 眾 毆 打 及 意 圖 傷 人 被 扣 查 。 消 息 稱 , 被 捕 者 同 屬 上 水 「 和 勝 和 」 黑 幫 兩 支 派 大 佬 「 寸 仔 」 及 「 肥 佬 賢 」 的 門 生 , 活 躍 於 上 水 及 粉 嶺 一 帶 , 兩 人 各 有 一 得 力 助 手 歪 文 及 肥 輝 。
較 早 前 , 歪 文 及 肥 輝 的 馬 仔 在 區 內 因 眼 望 望 問 題 起 爭 執 , 兩 人 早 前 曾 發 生 打 鬥 , 由 於 彼 此 屬 同 門 , 歪 文 及 肥 輝 各 向 大 佬 請 示 , 有 人 他 們 自 己 搞 掂 , 兩 人 遂 各 自 班 馬 , 並 相 約 前 晚 7 時 在 華 心 講 數 。 歪 文 一 方 約 15 人 帶 備 武 器 往 赴 約 , 但 肥 輝 一 方 未 有 出 現 。
歪 文 一 夥 用 膠 袋 載 武 器 往 雍 盛 苑 找 肥 輝 , 不 料 反 被 對 方 約 20 人 持 木 棍 伏 擊 , 更 被 奪 去 武 器 毆 打 , 殺 聲 震 天 , 場 面 混 亂 。 警 方 接 報 到 場 毆 鬥 者 四 散 逃 去 , 遺 下 4 傷 者 送 院 , 其 中 1 名 姓 高 (16 歲 ) 少 年 頭 部 重 創 , 一 度 危 殆 , 經 急 救 才 穩 定 下 來 。


:shock: :shock:

肥 輝 and 歪 文 ??? !!!


Top
 Profile  
 
 Post subject:
PostPosted: 11 Nov 2006 12:34 am 
User avatar

Joined: 26 Feb 2004 03:51 pm
Posts: 3619
Location: Hong Kong
[quote="Stanley"]

回到家中用盡九牛二虎之力拆螺絲,搞到條六角匙模都變形還不能把翼弄離機身。OK唯有忍痛,用電鑼


Top
 Profile  
 
 Post subject:
PostPosted: 16 Nov 2006 08:34 pm 
User avatar

Joined: 26 Feb 2004 03:51 pm
Posts: 3619
Location: Hong Kong
Stanley wrote:
裝好隻 Prodij 試飛,唉!不知為什麼,衰運又來,隻機放出後什麼控制都沒有,眼白白看見隻機好穩定地直飛出斜坡,漫漫的降落到老遠的山下叢林!是日烈日當空,以我現時的年紀…唉!體能都無法應付數小時來回攀山越嶺的挑戰,於是毅然決定放棄。我隻忠心硬硬跟隨了我已有六七年歲月的愛機就此說聲Bye Bye,我永遠都懷念您! :cry: :cry:
:x


我隻Prodij


Top
 Profile  
 
 Post subject:
PostPosted: 16 Nov 2006 10:36 pm 
User avatar

Joined: 03 Mar 2004 07:31 pm
Posts: 1020
:D :D

Stanley wrote:

[quote]我隻Prodij


Top
 Profile  
 
 Post subject:
PostPosted: 16 Nov 2006 11:18 pm 
User avatar

Joined: 26 Feb 2004 05:08 pm
Posts: 2937
Location: Hong Kong
[quote="Stanley"]
我隻Prodij


Top
 Profile  
 
 Post subject:
PostPosted: 16 Nov 2006 11:41 pm 
User avatar

Joined: 26 Feb 2004 05:31 pm
Posts: 741
Location: 沙田
They say "good gliders never die, they just float away ....."


Top
 Profile  
 
 Post subject:
PostPosted: 19 Nov 2006 04:18 pm 
User avatar

Joined: 03 Mar 2004 07:31 pm
Posts: 1020
:P :P

Stanley wrote:
[quote]唉!我投降啦,買


Top
 Profile  
 
 Post subject:
PostPosted: 19 Nov 2006 05:45 pm 
User avatar

Joined: 26 Feb 2004 05:08 pm
Posts: 2937
Location: Hong Kong
阿 Stanley 老老實實,點會諗到呢D蠱惑方法 . . . :twisted:


Top
 Profile  
 
 Post subject:
PostPosted: 19 Nov 2006 08:14 pm 
User avatar

Joined: 26 Feb 2004 03:51 pm
Posts: 3619
Location: Hong Kong
Ah Pong wrote:
The scratches on both side (marked with blue arrows) were made by your saw, not me. What I have done was simply put a small saw between the wing and the fuse, then using a drill with a screw driver head to turn the screw.


You are smart! How come I didn't think about this approach before! Thanks

Quote:
Because when I taking out the ballest, I only found one at the front!! That means you were flying with a far-forwarded C.G.. By now, you might understand why you have to walk down a hundred feet to pick up the plane.... :shock: :shock:

Anyway, you owe me a dinner !!

:P :D :P :D


Wow! I didn't know that it was head heavy, otherwise, I should have been...

OK, tell me when you would like to have the dinner.


Top
 Profile  
 
 Post subject:
PostPosted: 19 Nov 2006 09:20 pm 
User avatar

Joined: 26 Feb 2004 05:31 pm
Posts: 741
Location: 沙田
Stanley wrote:
tell me when you would like to have the dinner.


聽者有份呀 ﹗


Top
 Profile  
 
 Post subject:
PostPosted: 21 Nov 2006 10:24 pm 
User avatar

Joined: 26 Feb 2004 03:51 pm
Posts: 3619
Location: Hong Kong
I have a few movies taken during the last 60" F3F race. Just do not have time to make an interesting movie of them. Anyway, here they are:

The slowest performance by Ah Pong
http://www.rcsail.com/tmp/F3F60in_Ah_Pong.mpg

Angus brand new Ocelot
http://www.rcsail.com/tmp/F3F60in_Angus.mpg

Fat Fai 60" F3F experience
http://www.rcsail.com/tmp/F3F60in_Fat_Fai.mpg

The youngest F3F pilot of the day
http://www.rcsail.com/tmp/F3F60in_WC.mpg


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 64 posts ]  Go to page Previous  1, 2, 3

All times are UTC + 8 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron

RCSAIL Home

WindGURU at Ma On Shan, Clearwater Bay and Fei Ngo Shan

Powered by phpBB® Forum Software © phpBB Group