RC Slope Soaring in Hong Kong

A forum for rc sailplane pilots
It is currently Fri Mar 29, 2024 12:35 pm

All times are UTC + 8 hours




Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject: 風唔好,為有整
PostPosted: Sun Mar 14, 2004 9:10 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
:( 星期六叫亞 CM 去放机,點知引極佢都唔出,話要係屋企整机!我最後都係因為大霧,所以去左大清二樓放机,但係就唔係幾好飛! CM,你好野! :wink:
:oops: 今日 D 風睇泥都唔好得去邊,又好大霧,就去左平洋村找 YC 講既 HLG 大場,但係就點都見唔到個場!唔通真係有 ....... ! 好驚呀 ! :lol:
:( 返到屋企見 D 風都收到勿都冇,就不如學 CM 咁整机好過啦! 結果整左幾個月都未完工兩隻 NewSting 翼尖,卒之噴左油啦。不之幾咁開心 :D


Top
 Profile  
 
 Post subject:
PostPosted: Sun Mar 14, 2004 9:30 pm 
User avatar

Joined: Thu Feb 26, 2004 5:31 pm
Posts: 741
Location: 沙田
先排呢風好好﹐淨係顧著飛﹐也機都唔想整﹐嬾都出汁﹐呢兩日飛得唔過癮﹐先至有番D興致整機﹐依加既目標只係補番隻 mini Corado 黎參加HLG比賽。
Image


Top
 Profile  
 
 Post subject:
PostPosted: Sun Mar 14, 2004 9:44 pm 
User avatar

Joined: Thu Feb 26, 2004 5:08 pm
Posts: 3081
Location: Hong Kong
阿麥,我都好想好想好想去放機架,不過手擲機賽逼近,先至留係屋企整機咋 :D

整左兩日,先造好隻 DLG 個 pod 既 solid model,(係咪好靚仔呢 . . .) 不過以我既速度,九成九整唔起,下星期都係補番隻 Lucia,不過隻 Lucia 撞到內傷,都有排整!

Image


Last edited by CM Cheng on Mon Mar 12, 2007 12:57 am, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Sun Mar 14, 2004 10:22 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
CM Cheng wrote:
整左兩日,先造好隻 DLG 個 pod 既 solid model,(係咪好靚仔呢 . . .)


CM, 個 pod 真係好靚仔!但係你點出個 mould 呀? 用電腦 CNC 出會唔會好貴呀! :roll:


Top
 Profile  
 
 Post subject:
PostPosted: Mon Mar 15, 2004 1:26 am 
User avatar

Joined: Thu Feb 26, 2004 5:08 pm
Posts: 3081
Location: Hong Kong
我都想 CNC 個模,但係要好多($$$$$$$$$$) :cry:
另一個方法是用 SLA 造個 plug,再做纖維模,不過個 plug 要加工,而且都要($$$$$) :(
亦可以用電腦晝出每一層的 template ,切飛機木片疊起,即好似等高線咁,呢個方法最花工夫,但係最平($) :)

放埋對翼,都差不多勒:

Image


Last edited by CM Cheng on Mon Mar 12, 2007 12:58 am, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Mon Mar 15, 2004 10:26 am 
User avatar

Joined: Thu Feb 26, 2004 5:31 pm
Posts: 741
Location: 沙田
犀利﹗隻機有名未 ?


Top
 Profile  
 
 Post subject:
PostPosted: Mon Mar 15, 2004 5:58 pm 
User avatar

Joined: Thu Feb 26, 2004 5:08 pm
Posts: 3081
Location: Hong Kong
YC,對個名咁有興趣? 其實如果你 ckeck 下個 filename,大概都會估到她名叫 Apus,出自南天的一個小星座,意為 Bird of Paradise。


Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 17, 2004 12:33 am 
User avatar

Joined: Thu Feb 26, 2004 5:08 pm
Posts: 3081
Location: Hong Kong
整埋條尾勒:

Image

OK! 可以補Lucia啦!


Last edited by CM Cheng on Mon Mar 12, 2007 12:58 am, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 17, 2004 12:45 am 
User avatar

Joined: Thu Feb 26, 2004 5:31 pm
Posts: 741
Location: 沙田
CM﹐睇黎隻機都仲要有排至出得世﹐不如將D參數輸入 FMS simulator ﹐睇下佢係電腦入面飛成點。


Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 17, 2004 11:18 pm 
User avatar

Joined: Wed Mar 03, 2004 7:31 pm
Posts: 1026
I also repaired my broken NYX, hope she could be tested on forthcoming saturday. :D


Top
 Profile  
 
 Post subject:
PostPosted: Thu Mar 18, 2004 8:05 pm 
User avatar

Joined: Thu Feb 26, 2004 5:08 pm
Posts: 3081
Location: Hong Kong
Y C Lui wrote:
不如將D參數輸入 FMS simulator ﹐睇下佢係電腦入面飛成點。


Hello YC, I've not made a new plane with the FMS before, but I checked the .par file and I think those parameters are mainly used to model an existing airplane. For a plane still on the drawing board (I mean CAD :wink: ) I don't think those parameters can be obtainable without other prediction softwares or wind tunnel tests. Better put the effort on making the plane. It is a lot more fun :!:


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC + 8 hours


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron

RASAIL Home

WindGURU at Ma On Shan, Clearwater Bay and Fei Ngo Shan

Powered by phpBB® Forum Software © phpBB Group