RC Slope Soaring in Hong Kong

A forum for rc sailplane pilots
It is currently Thu Mar 28, 2024 5:07 pm

All times are UTC + 8 hours




Post new topic Reply to topic  [ 34 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Flight Simulator for F3F
PostPosted: Sat May 08, 2004 3:14 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
After some searching on internet, I found a flight simulator that was said to support F3F simulation. There's a forum on the topic in Yahoo. Have a look at the following link.

http://groups.yahoo.com/group/crrcsim/

I've not check out on the software yet, but it seems to be what we are looking for!


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 08, 2004 8:43 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
我由呢個法國網站 download 左個 CRRCSIM F3F 版泥試。 又真係 Work :P

http://obor.free.fr/navigator.php?url=/ ... =Logiciels

不過我部電腦行起上泥好慢,只好將 display set 到好平板,吟飛行就飛得快好多。個場好似德國個 Viking 賽場吟。 幾好 :!:

Image
可惜我只可以用 Joystick 泥玩,好難控掣!
要想方法整個 RC控既連接線至得!

試啦! 都幾好 :D


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 08, 2004 9:56 pm 
User avatar

Joined: Thu Feb 26, 2004 3:51 pm
Posts: 3711
Location: Hong Kong
亞麥我都玩過呢個Simulator,但我連Joystick都無,只喺用個mouse玩過。曾經嘗試整條Interface cable,買咗啲Processor chip 和其他料,又download咗佢哋個program,但最後借唔到個Programmer去燒個Program落粒chip度,買個Programmer就很貴,所以一直放低無跟進。而家我唸最好又方便嘅方法就是用個PPM to USB 嘅 converter,可以support任何PC window XP。但這樣的converter暫時只有英國一間公司有做,價錢要幾十鎊,好貴。早前聽Ringo講佢會做個PPM to USB interface cable,會價錢合理,唔知幾時先搞得掂?


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 08, 2004 10:43 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
[quote="Stanley"]買咗啲Processor chip 和其他料,又download咗佢哋個program,但最後借唔到個Programmer去燒個Program落粒chip度,quote]

Stanley,
我係個 crrcsim 既Files區見到個 audio-interface 既資料。
http://groups.yahoo.com/group/crrcsim/f ... ce/images/
Image
佢睇泥只係一條直接由個控連接到部電腦既 stereo mini-jack 。利用音波傳送指令。

定係有 D 野我睇溜左呀?


Last edited by K.Y.Mak on Thu May 13, 2004 8:47 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Sat May 08, 2004 11:35 pm 
User avatar

Joined: Thu Feb 26, 2004 3:51 pm
Posts: 3711
Location: Hong Kong
我聽人講過用Audio input都得,但就小心調較個audio level (line in)。我亦計過如果用audio input 再set咗個 audio 嘅 A/D converter 嘅 sampling frequency 喺44.1kHZ (common CD quality audio),用每一個 PPM 嘅 frame 喺20ms 和10 條 channels 計,每條Channel 只有 88 個 samples 左右,即喺話每條r/c channel 只可以有 88 個steps 嘅 resolution,比起我們一般用嘅PCM1024 有1024 個steps就少了好多!唔知控制起上嚟會唔會跳下跳下咁。不過呢個方法真喺幾方使,你不防試試,睇吓個 simulator 控得好唔好。


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 08, 2004 11:43 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
Stanley wrote:
我聽人講過用Audio input都得,但就小心調較個audio level (line in)。我亦計過如果用audio input 再set咗個 audio 嘅 A/D converter 嘅 sampling frequency 喺44.1kHZ (common CD quality audio),用每一個 PPM 嘅 frame 喺20ms 和10 條 channels 計,每條Channel 只有 88 個 samples 左右,即喺話每條r/c channel 只可以有 88 個steps 嘅 resolution,比起我們一般用嘅PCM1024 有1024 個steps就少了好多!唔知控制起上嚟會唔會跳下跳下咁。不過呢個方法真喺幾方使,你不防試試,睇吓個 simulator 控得好唔好。


Stanley,
我己經試左啦。 飛起上泥好過用 mouse 或者 joystick 好多 :D
D 控制都唔冇覺得跳跳。
不過個控D音波就係 speaker 聽得到!要想方法將 D 雜音除去 :roll:

快D整條線試啦,只需連接倆支pin,好方便 :o


Top
 Profile  
 
 Post subject:
PostPosted: Sun May 09, 2004 12:08 am 
User avatar

Joined: Thu Feb 26, 2004 3:51 pm
Posts: 3711
Location: Hong Kong
咁我就試吓整番條線玩吓。然後操fit啲,遲啲比較吓大家嘅F3F best time 好唔好。最好如果揾到方法set埋隻機個啲 properties 如翼形等等就更加好,到時又可以在PC上飛隻Sting 或者 NYX F3F 就好啦!


Top
 Profile  
 
 Post subject:
PostPosted: Sun May 09, 2004 12:24 am 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
This is one of my best rounds at 39.95 sec.
This type of site is very difficult to fly! very easy getting blow into the inland!
Image


Top
 Profile  
 
 Post subject:
PostPosted: Thu May 13, 2004 12:27 am 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
各位師兄,

我玩左幾日 CRRCsim-F3F ,覺得好正。
所以係唔同既地方,將幾個必要既檔案 download 左返泥。集成左個網頁,以方便大家安裝泥玩。
應該一日半日就有得玩。 :o
重有個龍虎榜,等大家可以將你D飛行記錄登上去。
其他人可以 download 呢D 飛行記錄檔案,係自已部電腦重播。 更加可以自已同佢一齊飛,一較高下 :P

我試過同我自已個最快記錄一齊飛,原來咁都會有好大心理壓力。咁樣飛經常會大失水準同撞机落海!

入泥睇睇啦 :D
http://i4kai.rchomepage.com/


Top
 Profile  
 
 Post subject:
PostPosted: Thu May 13, 2004 2:22 am 
User avatar

Joined: Mon Mar 01, 2004 5:05 am
Posts: 359
Location: Hong Kong
Mak

Very cool idea!!!
But my question is...is it a freeware?

Tsz Ming


Top
 Profile  
 
PostPosted: Thu May 13, 2004 3:33 pm 

Joined: Sat Feb 28, 2004 8:48 pm
Posts: 6
Hi all,

Here is a program, called SmartPropo to emulate your Futaba or JR Control into a Joystick, and you need to use a cable connect from your Tx controller into the PC line-in or microphone input.

I have used it in Realflight, FMS, Aerofly, and it do have a good response...

Try to download it.....
http://www.sekiriki.jp/smartpropo/index.html

Enjoy,

Louie


Top
 Profile  
 
 Post subject:
PostPosted: Thu May 13, 2004 3:56 pm 
User avatar

Joined: Thu Feb 26, 2004 3:51 pm
Posts: 3711
Location: Hong Kong
啊麥你唔知呢個 CRRCSIM 還可以玩 dynamic soaring,只要將風向 180 度倒轉,再把隻機開始時從高處插下就得,好過引架!


Top
 Profile  
 
 Post subject:
PostPosted: Thu May 13, 2004 7:46 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
Tsz Ming wrote:
Mak

Very cool idea!!!
But my question is...is it a freeware?

Tsz Ming


Tsz Ming,
It is freeware.
:D


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jul 18, 2004 5:48 pm 
User avatar

Joined: Thu Feb 26, 2004 5:31 pm
Posts: 741
Location: 沙田
係阿麥屋企玩 F3F sim 好過癮﹐今日就試下係自己部 notebook PC 裝﹐唔掂﹗個畫面好慢﹐熄左 texture 勉強可以玩熱氣流版﹐但 F3F 版就點都唔得。 個法國網站話
" ... need a recent video board having a Geoforce 2 chip or more or equivalent ...", 我部 notebook PC 既 display adaptor 係 ATI RAGE MOBILITY-P AGP2X, 玩 FMS simulator OK﹐請問有無人知個問題係邊 ?


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jul 18, 2004 9:23 pm 
Notebook 既 display adaptor多數用主記憶(RAM), 試試改變(加大)display既記憶(RAM), 因為FMS用的資源較小.


Top
  
 
 Post subject:
PostPosted: Sun Jul 18, 2004 10:15 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
Y C Lui wrote:
我部 notebook PC 既 display adaptor 係 ATI RAGE MOBILITY-P AGP2X, 玩 FMS simulator OK﹐請問有無人知個問題係邊 ?


我部陳年notebook p-3 700Mhz + RAGE MOBILITY display,玩 FMS 完全冇問題,但係同一部机玩 F3F sim 就唔夠快。
另一台 P-4 1.4Mhz 既 notebook 就免強玩得到,不過都係冇部 P-4 1.8Mhz + Gforce2 咁流暢。
F3FSim 對 display card 既要求好高、所以D notebook 電腦都唔係咁得,反而、如果係 desktop 舊机、換張新 display card 就巳經 OK 啦!


Top
 Profile  
 
 Post subject:
PostPosted: Fri Sep 24, 2004 11:14 pm 
User avatar

Joined: Mon Mar 01, 2004 10:36 am
Posts: 85
Location: H.K.
I had made the sim cable Joystick to R/C.<br>
I had test ok at: FMS, F3F, Ripmax, EasyFly, Acrofly Pro., and G2.
New Version USB sim cable.
I had test ok at: F3F 1.42, FMS, Ripmax, EasyFly and G2.


Last edited by ringo on Sat Aug 13, 2005 2:20 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Sat Oct 02, 2004 9:04 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
ringo wrote:
I had made the sim cable Joystick to R/C.<br>
I had test ok at: FMS, F3F, Ripmax, EasyFly, Acrofly Pro., and G2.


Hello Ringo,
What is the connecter type of the new sim cable?
Is it for USB or Joystick port ?
Does it work under Windows XP and 2000 ?
A number of CRRCSIM users are interested in your new cable!


Top
 Profile  
 
 Post subject:
PostPosted: Sat Oct 02, 2004 11:40 pm 
User avatar

Joined: Sat Feb 28, 2004 9:09 pm
Posts: 49
Location: WongTaiSin
ringo wrote:
I had made the sim cable Joystick to R/C.<br>
I had test ok at: FMS, F3F, Ripmax, EasyFly, Acrofly Pro., and G2.


Looking forward for sharing the cable connection information. :oops:

:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
:wink: :wink: :wink: :wink: :wink: :wink: :wink: :wink: :wink: :wink: :wink: :wink: :wink: :wink: :wink: :wink: :wink: :wink: :wink: :wink: :wink: :wink: :wink: :wink:


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 03, 2004 11:16 am 
User avatar

Joined: Mon Mar 01, 2004 10:36 am
Posts: 85
Location: H.K.
1. Use joystick port (DB15-15pin).
2. I had test at Win XP and Win 98 - normally Win 98 to Win XP can use ok.
Please call me.
My phone no is 92228678.


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 03, 2004 11:16 pm 
User avatar

Joined: Sat Feb 28, 2004 9:09 pm
Posts: 49
Location: WongTaiSin
ringo wrote:
1. Use joystick port (DB15-15pin).
2. I had test at Win XP and Win 98 - normally Win 98 to Win XP can use ok.
Please call me.
My phone no is 92228678.


Is that able to show us the detail????

:?: :?: :?: :?: :?: :?: :?: :?: :?: :?: :?: :?: :?: :?: :?:


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 05, 2004 12:02 am 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
ringo wrote:
1. Use joystick port (DB15-15pin).
2. I had test at Win XP and Win 98 - normally Win 98 to Win XP can use ok.
Please call me.
My phone no is 92228678.


Joystick port! Does it simulate a joystick ?
If so, it should work with MS Flight Sim 2004 ?
It's great for the desktop PC, but the notebook might not be able to use it for it don't have a joystick port.
However, I have a USB to Joystick convertor, which came with my MS joystick.
Do you think it will work with such converter ?

I would like to try it out on my PC, when I come back from the holiday.

See you soon!


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 05, 2004 12:37 am 
User avatar

Joined: Mon Mar 01, 2004 10:36 am
Posts: 85
Location: H.K.
1. Yes, Joystick port.
2. it simulate a joystick.
3. It should work with MS Flight Sim 2004.
4. It's great for the desktop PC,
5. You can test with such converter.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 34 posts ]  Go to page 1, 2  Next

All times are UTC + 8 hours


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron

RASAIL Home

WindGURU at Ma On Shan, Clearwater Bay and Fei Ngo Shan

Powered by phpBB® Forum Software © phpBB Group