RC Slope Soaring in Hong Kong

A forum for rc sailplane pilots
It is currently Fri Mar 29, 2024 6:55 pm

All times are UTC + 8 hours




Post new topic Reply to topic  [ 43 posts ]  Go to page Previous  1, 2
Author Message
 Post subject:
PostPosted: Mon Jun 14, 2004 12:29 am 
K.Y.Mak wrote:
However, does it require the USB programmer "CC-PHNX-LINK" to enable the brake function?

唔需要,用發射都可以set到,不過0.1v/step cut off就做唔到


Top
  
 
 Post subject:
PostPosted: Mon Jun 14, 2004 1:08 am 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
GEORGE wrote:
K.Y.Mak wrote:
However, does it require the USB programmer "CC-PHNX-LINK" to enable the brake function?

唔需要,用發射都可以set到,不過0.1v/step cut off就做唔到


What is 0.1v step cutoff :roll: :?:


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jun 14, 2004 1:11 pm 
cut off電壓由6V起可以按0.1V遞增(e.g. 6.1v / 6.2v.....) :D


Top
  
 
 Post subject:
PostPosted: Mon Jun 14, 2004 10:15 pm 
User avatar

Joined: Wed Mar 03, 2004 7:31 pm
Posts: 1026
:P Dear fellow, I've bought more than 144 piece of magnets today. You guys might obtain them form me and save your effort for finding the sourse. Please don't ask me the price as I treasure friendship more than money. The next step for me is buying the wire for you guys. I shall buy 0.5 and 0.4 in bulk.
Regards, Pong. :P


Top
 Profile  
 
 Post subject: Magnet
PostPosted: Mon Jun 14, 2004 11:20 pm 
User avatar

Joined: Thu Feb 26, 2004 10:52 pm
Posts: 648
Location: Shatin
Pong,

Please reserve 12 magnets for me. If you can find the 0.5mm wire, I need them also. If you don't want to get money back, I can buy you a lunch or a dinner.

Ken


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jun 14, 2004 11:21 pm 
User avatar

Joined: Thu Feb 26, 2004 3:51 pm
Posts: 3711
Location: Hong Kong
Ah Pong, can I have 2 sets of magnets?
I am going to make two more motors.
Thanks


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jun 14, 2004 11:35 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
Ah Pong,
One set of magnets for me please.
btw, do you thing Li-Poly batteries are good for my BL motor? I want it to be light.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jun 18, 2004 10:29 am 
User avatar

Joined: Wed Mar 03, 2004 7:31 pm
Posts: 1026
:roll: Dear all,
I had away for a while and now knowing you guys in need of magnets. I would bring along sufficinet magnets to flying site (FNS) on Saturday. See you there.
Mak,
This type of motoe has no problem with Li-ploy, provided that your ESC could set to correct cut off level.

Happy winding and gluing.
:P


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jun 21, 2004 8:33 pm 
User avatar

Joined: Mon Jun 21, 2004 8:27 pm
Posts: 3
:shock: Dear Pong,

Could you please serve a set of magnets for me, or please kindly make one BL for me.
Many thanks. :P


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 30, 2004 9:38 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
好慘呀 :cry: :cry: :cry:

我係個日本網站買隻 Phoenix Micro 10 BL controller 燒左呀 :!:

原來 D 電變係冇 polarity reverse protection 既 :oops:

:? 重要燒親隻手指添 :?


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jul 06, 2004 2:07 pm 
User avatar

Joined: Thu Feb 26, 2004 3:51 pm
Posts: 3711
Location: Hong Kong
Aircraft world
有自制CD-ROM無碳刷摩打買。百多蚊港幣,唔使攪到手指都郁唔到。
http://aircraft-world.com/prod_datasheets/cdmotor.htm勁
似乎個摩打每極用兩粒磁石,比我們單粒勁喎!


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jul 09, 2004 3:02 am 

Joined: Fri Mar 05, 2004 10:05 pm
Posts: 122
Stanley wrote:
Aircraft world
有自制CD-ROM無碳刷摩打買。百多蚊港幣,唔使攪到手指都郁唔到。
http://aircraft-world.com/prod_datasheets/cdmotor.htm勁
似乎個摩打每極用兩粒磁石,比我們單粒勁喎!



http://aircraft-world.com/prod_datasheets/cdmotor.htm


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jul 15, 2004 12:04 am 
Dear K.Y.Mak,
where can I buy 0.5mm既線 , I want try to DIY CD-ROM BL 摩打 also.


Top
  
 
 Post subject:
PostPosted: Thu Jul 15, 2004 12:04 am 
:D

Dear K.Y.Mak,
where can I buy 0.5mm既線 , I want try to DIY CD-ROM BL 摩打 also.


Top
  
 
 Post subject:
PostPosted: Thu Jul 15, 2004 12:05 am 
:D

Dear K.Y.Mak,
where can I buy 0.5mm既線 , I want try to DIY CD-ROM BL 摩打 also.


Top
  
 
 Post subject:
PostPosted: Thu Jul 15, 2004 9:52 am 
User avatar

Joined: Wed Mar 03, 2004 7:31 pm
Posts: 1026
Dear SHCHAN,

0.5mm wire seems to be too thick for a standard CDROM moter, unless you wish to make a hotliner works in duct fan. I suggest you use 0.4mm. It is very difficult to find magnet wire in HK nowadays. Even you are lucky enough to find a guy who having stock, he would most likely ask you to buy several pound in weight (not in lenght). Regards.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jul 15, 2004 8:20 pm 
shchan wrote:
Dear K.Y.Mak,
where can I buy 0.5mm既線 , I want try to DIY CD-ROM BL 摩打 also.


I got my from an old 12V transformer.


Top
  
 
 Post subject:
PostPosted: Thu Jul 15, 2004 8:52 pm 
I got my from an old 12V transformer.[/quote]


is from pc transformer?


Top
  
 
 Post subject:
PostPosted: Thu Jul 15, 2004 9:18 pm 
shchan wrote:
is from pc transformer?


No, it's only a transformer for small electic item. I can't remember what's it for! It convert 240V from the wall socket to 12V power.


Top
  
 
 Post subject:
PostPosted: Thu Jul 15, 2004 10:48 pm 
User avatar

Joined: Wed Mar 03, 2004 7:31 pm
Posts: 1026
:P hey guys,
I have connection with some professions who having the magnet wire stock. I shall ask him to sell some of the wire to me. Just post your needs (whether 0.3, 0.4 or 0.5mm)in this forum, I'll bring them to you guys at FNS. :P


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 43 posts ]  Go to page Previous  1, 2

All times are UTC + 8 hours


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron

RASAIL Home

WindGURU at Ma On Shan, Clearwater Bay and Fei Ngo Shan

Powered by phpBB® Forum Software © phpBB Group