Hong Kong RC Sailplane Forum 香港滑翔機發燒友論壇

How come all of you could be able to chat thoughout the morning?
It is office hours!!
What kind of jobs that you guys having??

Should I copy this link to your boss??

Hi Pong,
No problem to copy to my boss as...we are sitting round table.
Ah Wing, CM, Mak, etc.. me are mutual-boss to each other. Ah Wing is CM's boss, CM is Mak's boss, etc and I am Ah Wing's boss.. A closed loop.
How about if we copy yours to your boss? LOL

All of you are talking about 'the fastest' - the pylon racer. Don't leave Ah Pong alone. He's 'the fastest...' at present.

Not just that, also sms la & email as well for placing orders That's why we can finish our work so effective with great productivity

Unlike you la, we are all not working for government

Weather forecasts light wind on coming Sunday. Anybody wana fun flying the pylon racers?

經過兩年既準備時間，最後都比我完成左隻電動 racer 啦！


S200 + Mega 16/15/2 + 2100mAh ThunderPower LiPo + 30A 電變。
隻机飛行重量係 420g, C G 好前，大約 1/3 wing cord 左右。 我覺得後 D 可能會比較好 !

大家睇睇幾時去飛電机呀

阿麥，我唸你都要自已去飛Solo至得啦，經還兩年的時間，我

你個CG係1/3.其實好後呀,可以話衰梗!!我地試過好難飛,DIN 雞一樣,加前5-8MM剌,尾板上下只要2-3MM千析唔好多,PCM接收唔少得,千祈咪用35MHZ,祝好運!!!!!!!!!!

吓 ！ 我重將舊電,有咁後、放咁後

咁 CG 應該係 幾多 CM 呀 ？

隻机 Full 鳼,我都重係覺得未夠力。會吳會係個 ESC 既問題呢
好熱呀！

Mak,
JUst push the battery as forward as possible until it touches the end of the motor!! Mine is 20mm cg.

Bare in mine that if it is a S200, you may need to shim up the leading edge of elevator. Hence getting someone next to you and ready to trim the elevator at the maiden. It will pitch up quickly after launching.

My S200 is still sleeping here after test flight and repairing.

The small diameter and square pitch gives you a feel of not enough power, but it is not in fact.
The plane needs some acceleration and rev up and then gives you the speed.

Aileron and elevator throw are just 2 mm for me.

It is really not that frightening.

Good luck!

20-24MM都可以,你呢過動力最少有160KM,只不過係練習機咋!!仲有果D有想死感覺既STINGER,VOODOO,....要幾快,有幾快.如果有太熱的話,用4.1X4.1 槳一定好D呀!