RC Slope Soaring in Hong Kong
http://www.rcsail.com/forum/

Homemade brushless motor
http://www.rcsail.com/forum/viewtopic.php?f=6&t=116
Page 2 of 2

Author:  GEORGE [ Mon Jun 14, 2004 12:29 am ]
Post subject: 

K.Y.Mak wrote:
However, does it require the USB programmer "CC-PHNX-LINK" to enable the brake function?

唔需要,用發射都可以set到,不過0.1v/step cut off就做唔到

Author:  K.Y.Mak [ Mon Jun 14, 2004 1:08 am ]
Post subject: 

GEORGE wrote:
K.Y.Mak wrote:
However, does it require the USB programmer "CC-PHNX-LINK" to enable the brake function?

唔需要,用發射都可以set到,不過0.1v/step cut off就做唔到


What is 0.1v step cutoff :roll: :?:

Author:  Guest [ Mon Jun 14, 2004 1:11 pm ]
Post subject: 

cut off電壓由6V起可以按0.1V遞增(e.g. 6.1v / 6.2v.....) :D

Author:  Ah Pong [ Mon Jun 14, 2004 10:15 pm ]
Post subject: 

:P Dear fellow, I've bought more than 144 piece of magnets today. You guys might obtain them form me and save your effort for finding the sourse. Please don't ask me the price as I treasure friendship more than money. The next step for me is buying the wire for you guys. I shall buy 0.5 and 0.4 in bulk.
Regards, Pong. :P

Author:  ken [ Mon Jun 14, 2004 11:20 pm ]
Post subject:  Magnet

Pong,

Please reserve 12 magnets for me. If you can find the 0.5mm wire, I need them also. If you don't want to get money back, I can buy you a lunch or a dinner.

Ken

Author:  Stanley [ Mon Jun 14, 2004 11:21 pm ]
Post subject: 

Ah Pong, can I have 2 sets of magnets?
I am going to make two more motors.
Thanks

Author:  K.Y.Mak [ Mon Jun 14, 2004 11:35 pm ]
Post subject: 

Ah Pong,
One set of magnets for me please.
btw, do you thing Li-Poly batteries are good for my BL motor? I want it to be light.

Author:  Ah Pong [ Fri Jun 18, 2004 10:29 am ]
Post subject: 

:roll: Dear all,
I had away for a while and now knowing you guys in need of magnets. I would bring along sufficinet magnets to flying site (FNS) on Saturday. See you there.
Mak,
This type of motoe has no problem with Li-ploy, provided that your ESC could set to correct cut off level.

Happy winding and gluing.
:P

Author:  Ah Foon [ Mon Jun 21, 2004 8:33 pm ]
Post subject: 

:shock: Dear Pong,

Could you please serve a set of magnets for me, or please kindly make one BL for me.
Many thanks. :P

Author:  K.Y.Mak [ Wed Jun 30, 2004 9:38 pm ]
Post subject: 

好慘呀 :cry: :cry: :cry:

我係個日本網站買隻 Phoenix Micro 10 BL controller 燒左呀 :!:

原來 D 電變係冇 polarity reverse protection 既 :oops:

:? 重要燒親隻手指添 :?

Author:  Stanley [ Tue Jul 06, 2004 2:07 pm ]
Post subject: 

Aircraft world
有自制CD-ROM無碳刷摩打買。百多蚊港幣,唔使攪到手指都郁唔到。
http://aircraft-world.com/prod_datasheets/cdmotor.htm勁
似乎個摩打每極用兩粒磁石,比我們單粒勁喎!

Author:  Billy [ Fri Jul 09, 2004 3:02 am ]
Post subject: 

Stanley wrote:
Aircraft world
有自制CD-ROM無碳刷摩打買。百多蚊港幣,唔使攪到手指都郁唔到。
http://aircraft-world.com/prod_datasheets/cdmotor.htm勁
似乎個摩打每極用兩粒磁石,比我們單粒勁喎!



http://aircraft-world.com/prod_datasheets/cdmotor.htm

Author:  shchan [ Thu Jul 15, 2004 12:04 am ]
Post subject: 

Dear K.Y.Mak,
where can I buy 0.5mm既線 , I want try to DIY CD-ROM BL 摩打 also.

Author:  shchan [ Thu Jul 15, 2004 12:04 am ]
Post subject: 

:D

Dear K.Y.Mak,
where can I buy 0.5mm既線 , I want try to DIY CD-ROM BL 摩打 also.

Author:  shchan [ Thu Jul 15, 2004 12:05 am ]
Post subject: 

:D

Dear K.Y.Mak,
where can I buy 0.5mm既線 , I want try to DIY CD-ROM BL 摩打 also.

Author:  Ah Pong [ Thu Jul 15, 2004 9:52 am ]
Post subject: 

Dear SHCHAN,

0.5mm wire seems to be too thick for a standard CDROM moter, unless you wish to make a hotliner works in duct fan. I suggest you use 0.4mm. It is very difficult to find magnet wire in HK nowadays. Even you are lucky enough to find a guy who having stock, he would most likely ask you to buy several pound in weight (not in lenght). Regards.

Author:  Guest [ Thu Jul 15, 2004 8:20 pm ]
Post subject: 

shchan wrote:
Dear K.Y.Mak,
where can I buy 0.5mm既線 , I want try to DIY CD-ROM BL 摩打 also.


I got my from an old 12V transformer.

Author:  shchan [ Thu Jul 15, 2004 8:52 pm ]
Post subject: 

I got my from an old 12V transformer.[/quote]


is from pc transformer?

Author:  Guest [ Thu Jul 15, 2004 9:18 pm ]
Post subject: 

shchan wrote:
is from pc transformer?


No, it's only a transformer for small electic item. I can't remember what's it for! It convert 240V from the wall socket to 12V power.

Author:  Ah Pong [ Thu Jul 15, 2004 10:48 pm ]
Post subject: 

:P hey guys,
I have connection with some professions who having the magnet wire stock. I shall ask him to sell some of the wire to me. Just post your needs (whether 0.3, 0.4 or 0.5mm)in this forum, I'll bring them to you guys at FNS. :P

Page 2 of 2 All times are UTC + 8 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/