RC Slope Soaring in Hong Kong
http://www.rcsail.com/forum/

Robbe 1/4 scale ASH26E
http://www.rcsail.com/forum/viewtopic.php?f=5&t=2088
Page 1 of 1

Author:  CM Cheng [ Tue Sep 06, 2011 7:02 pm ]
Post subject:  Robbe 1/4 scale ASH26E

呢隻ASH26E,買咗差唔多廿年,本來都係繼續擺落去 . . . :lol: :lol: 但為咗支持像真機組長阿麥大大 8) ,决定開工,而且改埋做動力滑翔機 :D
Image

有Self-launching system,冇風都唔驚 :evil:
Image

申出來係咁樣 :o
Image

個收轆好精巧 :o
Image

呢套係Sequence control,佢可以控制成個Self-launching system的動作,仲有啲保護工能等等。應該唔難整,但買一套學吓有冇竅妙,以後可以自己整 :lol: :lol:
Image


To be continued . . . 可能一年後 . .

Author:  Alan Lau [ Tue Sep 06, 2011 7:44 pm ]
Post subject: 

讚!

Author:  K.Y.Mak [ Wed Sep 07, 2011 12:34 am ]
Post subject: 

like

Author:  cpms [ Sat Sep 17, 2011 10:29 am ]
Post subject: 

想問個self launch係唔係有個單向bearing?係支槳嘅軸度。

Author:  CM Cheng [ Tue Sep 20, 2011 9:38 pm ]
Post subject: 

cpms wrote:
想問個self launch係唔係有個單向bearing?係支槳嘅軸度。



:idea:

Author:  CM Cheng [ Tue Mar 13, 2012 10:42 pm ]
Post subject:  Re: Robbe 1/4 scale ASH26E

Canopy石膏模。

Attachments:
File comment: Canopy石膏模。
ASH26E Canopy mold.jpg
ASH26E Canopy mold.jpg [ 171.46 KiB | Viewed 36377 times ]

Author:  marcus [ Thu Oct 13, 2016 10:34 pm ]
Post subject:  Re: Robbe 1/4 scale ASH26E

Can you mould me new canopy? i have multiplex LS3, 3.2m no canopy, im sure this one can work !
Would really appreciate ! marcus 53298885

Author:  CM Cheng [ Fri Oct 14, 2016 10:25 pm ]
Post subject:  Re: Robbe 1/4 scale ASH26E

marcus wrote:
Can you mould me new canopy? i have multiplex LS3, 3.2m no canopy, im sure this one can work !
Would really appreciate ! marcus 53298885


Hello Marcus,

My ASH26 is still on hold for the other projects. Sure I will make one for you when it is ready. Don't worry, it won't take much time, a few years maybe :lol:

On the other hand, have you checked if you can order a canopy from the manufacturer? This could save you some time and work. My ASH26 is made by Robbe which is out of business. So I have to make one myself.

Cheers,
CM

Page 1 of 1 All times are UTC + 8 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/