| RC Slope Soaring in Hong Kong http://www.rcsail.com/forum/ |
|
| Robbe 1/4 scale ASH26E http://www.rcsail.com/forum/viewtopic.php?f=5&t=2088 |
Page 1 of 1 |
| Author: | CM Cheng [ Tue Sep 06, 2011 7:02 pm ] |
| Post subject: | Robbe 1/4 scale ASH26E |
呢隻ASH26E，買咗差唔多廿年，本來都係繼續擺落去 . . .  但為咗支持像真機組長阿麥大大  ，决定開工，而且改埋做動力滑翔機 
有Self-launching system，冇風都唔驚 
申出來係咁樣 
個收轆好精巧
呢套係Sequence control，佢可以控制成個Self-launching system的動作，仲有啲保護工能等等。應該唔難整，但買一套學吓有冇竅妙，以後可以自己整
To be continued . . . 可能一年後 . . |
|
| Author: | Alan Lau [ Tue Sep 06, 2011 7:44 pm ] |
| Post subject: | |
讚! |
|
| Author: | K.Y.Mak [ Wed Sep 07, 2011 12:34 am ] |
| Post subject: | |
like |
|
| Author: | cpms [ Sat Sep 17, 2011 10:29 am ] |
| Post subject: | |
想問個self launch係唔係有個單向bearing?係支槳嘅軸度。 |
|
| Author: | CM Cheng [ Tue Sep 20, 2011 9:38 pm ] |
| Post subject: | |
cpms wrote: 想問個self launch係唔係有個單向bearing?係支槳嘅軸度。
係 
|
|
| Author: | CM Cheng [ Tue Mar 13, 2012 10:42 pm ] | ||
| Post subject: | Re: Robbe 1/4 scale ASH26E | ||
Canopy石膏模。
|
|||
| Author: | marcus [ Thu Oct 13, 2016 10:34 pm ] |
| Post subject: | Re: Robbe 1/4 scale ASH26E |
Can you mould me new canopy? i have multiplex LS3, 3.2m no canopy, im sure this one can work ! Would really appreciate ! marcus 53298885 |
|
| Author: | CM Cheng [ Fri Oct 14, 2016 10:25 pm ] |
| Post subject: | Re: Robbe 1/4 scale ASH26E |
marcus wrote: Can you mould me new canopy? i have multiplex LS3, 3.2m no canopy, im sure this one can work ! Would really appreciate ! marcus 53298885 Hello Marcus, My ASH26 is still on hold for the other projects. Sure I will make one for you when it is ready. Don't worry, it won't take much time, a few years maybe On the other hand, have you checked if you can order a canopy from the manufacturer? This could save you some time and work. My ASH26 is made by Robbe which is out of business. So I have to make one myself. Cheers, CM |
|
| Page 1 of 1 | All times are UTC + 8 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|