RC Slope Soaring in Hong Kong
http://www.rcsail.com/forum/

沙樂美 DLG
http://www.rcsail.com/forum/viewtopic.php?f=4&t=84
Page 1 of 3

Author:  Y C Lui [ Tue Apr 13, 2004 10:37 am ]
Post subject:  沙樂美 DLG

阿堅同肥輝剛剛 call 我﹐話對隻捷克廠 Horejsi Model 做既 Salome DLG 有興趣﹐呢度有幅相比大家睇下﹕
Image

隻機既資料係呢度﹕http://www.horejsi.cz/english/index2eng.htm﹐ 依家最少有 4 個人訂左﹐有興趣既朋友可以搵 Angus﹐一齊訂可以平D。

Author:  Guest [ Tue Apr 13, 2004 4:09 pm ]
Post subject: 

How much does the Salome cost? :lol:

Author:  Y C Lui [ Tue Apr 13, 2004 5:11 pm ]
Post subject: 

Guest wrote:
How much does the Salome cost? :lol:


廠家個網站標價係 140 歐羅﹐ Angus 好似話可以講到8折﹐即係 112 歐羅﹐大約 HK$1100,運費另計﹐但係唔敢肯定﹐詳情要問 Angus.

Author:  Guest [ Tue Apr 13, 2004 8:48 pm ]
Post subject:  Re: 沙樂美 DLG

Y C Lui wrote:
阿堅同肥輝剛剛 call 我﹐話對隻捷克廠 Horejsi Model 做既 Salome DLG 有興趣﹐呢度有幅相比大家睇下﹕
Image

隻機既資料係呢度﹕http://www.horejsi.cz/english/index2eng.htm﹐ 依家最少有 4 個人訂左﹐有興趣既朋友可以搵 Angus﹐一齊訂可以平D。

YC Lui你好 :D
我有興趣訂遇我一只

Author:  Y C Lui [ Tue Apr 13, 2004 8:52 pm ]
Post subject:  Re: 沙樂美 DLG

Anonymous wrote:
YC Lui你好 :D
我有興趣訂遇我一只


請聯絡 Angus, 電郵﹕perseus@netvigator.com

Author:  zman [ Tue Apr 13, 2004 9:00 pm ]
Post subject:  Re: 沙樂美 DLG

Y C Lui wrote:
阿堅同肥輝剛剛 call 我﹐話對隻捷克廠 Horejsi Model 做既 Salome DLG 有興趣﹐呢度有幅相比大家睇下﹕
Image

隻機既資料係呢度﹕http://www.horejsi.cz/english/index2eng.htm﹐ 依家最少有 4 個人訂左﹐有興趣既朋友可以搵 Angus﹐一齊訂可以平D。

Y C Lui 你好
吾知點解 log in吾到 :lol:
都是這句我有興趣遇我一只 :P

Author:  Angus [ Sun May 09, 2004 1:31 am ]
Post subject: 

第一批Salome同Salsa返左,發覺捷克廠家D手工十分好。有幾位帥兄話有興趣,于是打算再訂第二批。Salome機價連運費大約港幣千二至千三,而Salsa大約八百。

有興趣既朋友請聯絡我,電郵﹕perseus@netvigator.com

Author:  Y C Lui [ Sun May 23, 2004 12:08 am ]
Post subject: 

終於可以開工啦 ﹗
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Author:  Y C Lui [ Sun May 23, 2004 11:07 pm ]
Post subject: 

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Author:  Y C Lui [ Wed May 26, 2004 11:57 pm ]
Post subject: 

Image
Image
Image
Image
Image
Image
Image

Image
Image
Image
Image
Image
Image

Author:  Guest [ Thu May 27, 2004 9:12 pm ]
Post subject: 

Y.C.,

佩服, 佩服. 8)

你的SALOME連環制作過程重勁過我看到外國的 R.C. Discussion 圖片. 相信他們也要考一.

現在好像看"整機連環圖"一樣. 期待你下一期製作特.

Alan

Author:  Patrick Yellow [ Sat May 29, 2004 11:09 am ]
Post subject:  Vaccum problem?

Hi Y.C.,

Just watch your new pictures to making servos tray with vacuum technic, would you please show me how to seal the bag up if you don't mind, coz' what I did now is too complicated, thank you very much!!!!!! :wink:

Patrick

Author:  Y C Lui [ Sat May 29, 2004 2:49 pm ]
Post subject: 

Hello Patrick,

我用既真空袋一邊(下圖右邊) 係用 sealing tape 封住

Image
sealing tape 係一種好似趙完既香口膠咁既物質﹐條喉插入袋個位都可以用呢種料封住﹐好易造兼可靠
Image

個袋既另一邊係用下圖既 quick lock seal封住﹐結構同三文治袋個封口差唔多。
Image


以上物料可以從 http://www.acp-composites.com/買到﹐但呢間野最近唔知搞也鬼﹐十問十唔應。

Author:  Patrick [ Sat May 29, 2004 4:22 pm ]
Post subject:  Thank you!

Thank you very much Y.C., will have a look on that site now! Bye!

Author:  Y C Lui [ Mon May 31, 2004 12:22 am ]
Post subject: 

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Author:  Patrick Yellow [ Mon May 31, 2004 2:50 pm ]
Post subject:  wing's weight?

Hello Y.C.,

Me again! Patrick, would you please also show the weight of the wing and the total weight of the plane?? :?: :?: :lol:

Patrick

Author:  Patrick Yellow [ Mon May 31, 2004 2:58 pm ]
Post subject:  Forgot something!!!!!

Please watching out, there is no problem for the bolts to fix the wing but it's not really strong enough for the body to hold the nuts if there are no reinforce somewhere around, I just repair someguy's plane body which crack like that becoz' of doing DL!

Author:  Y C Lui [ Mon May 31, 2004 9:12 pm ]
Post subject: 

Hi Patrick,

我重未磅過我隻機﹐阿 Alan 隻 Salome 既全備重量係 290g﹐ 機頭唔駛定鉛。 嘩﹗你朋友掟到扯裂個機身咁犀利 ? 力度一定係好勁﹐我地多數都係掟得唔高﹐又失速﹐隻機成舊石咁跌番落黎撞爛﹐有機會一定要搵埋你朋友一齊出黎飛﹐等我地可以學下點掟 DLG.

Author:  Patrick Yellow [ Tue Jun 01, 2004 11:41 am ]
Post subject:  not easy to do the DL

Hi Y.C.,

This types are different to the Owl or the Swing, they are really not easy to launch, most of the time they will do a roll itself and then hit the ground hardly, it's also happen in our secret weapon too! You may try to usa the rudder and the aileron to make a balance.

How's your height detector! arrive yet?

Patrick

Author:  CM Cheng [ Tue Jun 01, 2004 11:47 am ]
Post subject: 

"Secret weapon" . . . That's interesting :!:

Seems like we will see a lot of new planes in the next HLG contest!

Author:  Patrick Yellow [ Tue Jun 01, 2004 4:15 pm ]
Post subject: 

Yea yea!! :lol: :lol: next time will be a lot more interesting exciting and attractive!! :shock: :shock:
I guess there are some amount of people pratising secretly!! :shock: 8) 8) 8)
What you will prepare for the next, CM Cheng? :idea:

Author:  CM Cheng [ Tue Jun 01, 2004 4:25 pm ]
Post subject: 

Hello Patrick, looking forward to see your secret weapon! Can you reveal a little about it? (bagged or built-up, etc) For me I will continue to make the Apus after the next F3F.

Author:  Y C Lui [ Tue Jun 01, 2004 9:08 pm ]
Post subject:  Re: not easy to do the DL

Patrick Yellow wrote:
.....they will do a roll itself and then hit the ground hardly....


係呀﹗我地掟 1.5m DLG 好多時都係咁架﹗隻機離手後就馬上做個半 roll﹐空中反轉﹐好尷尬﹐唔知點處理。阿 CM 曾經因為咁樣而被迫反轉隻機降落。我到依家都唔知點樣可以防止到呢種動態﹐fing 隻機既時候外翼速度較高﹐升力較大﹐導致隻機會 roll 埋個人個邊。呢日本仔教將翼尖條棍仔裝後D黎減低內外翼既升力差﹐我打算搵隻 Salome 試下﹐睇下有無用

Image

你唔提我都唔記得訂左個 LOLO 仲未到﹐要追下個英國佬至得。呢條友次次都係咁無喱搭圾﹐以前同佢訂過兩隻 3m 機﹐用平郵﹐好耐都未到貨﹐問佢搞也鬼﹐佢竟然話唔記得左﹐但佢即刻貼錢用速遞記過黎﹐4日就到﹐今次睇怕又係歷史重演。

Page 1 of 3 All times are UTC + 8 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/