RC Slope Soaring in Hong Kong http://www.rcsail.com/forum/ |
|
LOLO http://www.rcsail.com/forum/viewtopic.php?f=4&t=146 |
Page 1 of 1 |
Author: | Y C Lui [ Fri Jun 11, 2004 12:15 am ] |
Post subject: | LOLO |
卒之到左啦﹗只有一隻 Futaba 3107 servo 咁重 敏感度幾高﹐將個 LOLO 重複舉起﹐放低既 log: |
Author: | CM Cheng [ Fri Jun 11, 2004 12:51 am ] |
Post subject: | |
YC,好正喎! 不過個 LoLo log 佐 -1m 至超過 2m,我睇你唔止"重覆舉起"咁簡單,你係咪將佢當波踢? 好期待下次 HLG 賽, 肯定有好多新機和技術! 嘩! 我都要快快搞掂自己隻Apus先得 |
Author: | Tsz Ming [ Fri Jun 11, 2004 1:00 am ] |
Post subject: | |
CM How much is it, it seem very helpful for me for next project R&D. How many you have? is it possible.... Tsz Ming |
Author: | CM Cheng [ Fri Jun 11, 2004 1:08 am ] |
Post subject: | |
Hello Tsz Ming, I think you mean "YC" but not "CM" . . . |
Author: | Tsz Ming [ Fri Jun 11, 2004 1:12 am ] |
Post subject: | |
Yes, YC not CM. Sorry. How much is it?????? I am very interest. |
Author: | Y C Lui [ Fri Jun 11, 2004 1:24 am ] |
Post subject: | |
個 LOLO 係捷克製品http://www.lomcovak.cz/a2/a2.html連郵費價 125 歐羅。我同英國 Soarhigh 買左一個﹐佢竟然用平郵寄黎﹐成三個星期都未到﹐發 email 催佢之後﹐佢就即刻用空郵寄另外一隻俾我﹐就係我收到呢隻。平郵寄個隻應該好快就到﹐我打算寄返俾佢﹐不過如果有人有興趣﹐我可以同佢賣埋。費事寄黎寄去咁麻煩。 |
Author: | Tsz Ming [ Fri Jun 11, 2004 4:44 am ] |
Post subject: | |
OK, YC. Count it to me. Tsz Ming |
Author: | Y C Lui [ Sat Jul 03, 2004 2:18 am ] |
Post subject: | |
Before installing it into my DLG, I tested the LOLO on the bench and it worked just as described by the instruction. Then I took my DLG to the field and after a few flights, I tried to transfer the logged altitude data to my notebook PC . Whoops! The read-data window didn |
Author: | Stanley [ Sat Jul 03, 2004 1:00 pm ] |
Post subject: | |
Hi Y.C., Have you contacted Roman Voitech, LOLO's manufacturer? He is a nice guy and would be able to give you some advises. Stanley |
Author: | Y C Lui [ Sat Jul 03, 2004 4:54 pm ] |
Post subject: | |
無呀﹗我個 LOLO 係同英國 Soarhigh 買﹐所以我淨係通知左 Soarhigh﹐過幾日如果佢唔覆我都打算搵捷克佬。個 LOLO 雖然怕熱﹐ 都唔係唔用得﹐只需要過 data 落 PC 之前擺隻 LOLO 係架車既冷氣口前面吹番凍佢就應該 OK。 |
Page 1 of 1 | All times are UTC + 8 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |