先排訂左兩隻台灣製既 Waypoint 6 gram servo﹐前日到貨。價錢大約 HK$120﹐平過 Hitec 好多. 但初步印像幾好﹐完全感覺唔到有虛位
兩隻 servo 打算用係下一個 project﹕激輕一米 DLG﹐全備重量 99g !
| RC Slope Soaring in Hong Kong http://www.rcsail.com/forum/ |
|
| waypoint servo http://www.rcsail.com/forum/viewtopic.php?f=4&t=127 |
Page 1 of 1 |
| Author: | Y C Lui [ Wed May 26, 2004 6:18 pm ] |
| Post subject: | waypoint servo |
先排訂左兩隻台灣製既 Waypoint 6 gram servo﹐前日到貨。價錢大約 HK$120﹐平過 Hitec 好多. 但初步印像幾好﹐完全感覺唔到有虛位
兩隻 servo 打算用係下一個 project﹕激輕一米 DLG﹐全備重量 99g !
|
|
| Author: | Tsz Ming [ Wed May 26, 2004 7:08 pm ] |
| Post subject: | |
Y.C Apple to apple, orange to orange. How is it compare to GWS or Futaba (#3107)brand? Tsz Ming |
|
| Author: | Y C Lui [ Thu May 27, 2004 12:10 am ] |
| Post subject: | |
Tsz Ming wrote: How is it compare to GWS or Futaba (#3107)brand?
Tsz Ming GWS 既 6 gram 重 servo 係有﹐但我唔知價錢﹐ Futaba 既 3107 servo 係 9 gram 級﹐大力D﹐最近 Futaba 出左隻 6 gram servo, 叫 3108﹐ 個日係清水灣見 Alan 裝左係佢隻 Salome 度﹐不過價錢就唔清楚。 |
|
| Author: | Alan Chan [ Thu May 27, 2004 8:49 pm ] |
| Post subject: | |
Y.C & Tsz Ming, Futaba 3108 最減價至HK$ 130 左右, 香及九龍都有貨. Offical Weight of S3108 is 7.6 gram. Torque 1.2 Kg.cm at 4.8 V. Regards, Alan Chan |
|
| Author: | ken [ Fri May 28, 2004 1:10 am ] |
| Post subject: | China Servo |
YC, I brought some cheap servo from China each cost me RMB$70. The power is weak but it can return to center position quite accuate. They are very light too. 
|
|
| Author: | Kevin YSL [ Fri May 28, 2004 10:06 am ] |
| Post subject: | |
$70 隻亞陳伯有得買唔使上大陸 |
|
| Page 1 of 1 | All times are UTC + 8 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|