Hong Kong RC Sailplane Forum 香港滑翔機發燒友論壇
http://www.rcsail.com/forum/

servo 掃牙
http://www.rcsail.com/forum/viewtopic.php?f=3&t=44
Page 1 of 1

Author:  Y C Lui [ 08 Mar 2004 11:37 pm ]
Post subject:  servo 掃牙

金屬牙同膠牙混合使用。 有無人認得係邊隻 servo ﹖
Image

Author:  KAM [ 08 Mar 2004 11:45 pm ]
Post subject: 

Isn't it the Hitec 85MG ??

Author:  Y C Lui [ 08 Mar 2004 11:49 pm ]
Post subject: 

要再估。 85MG 好似係全金屬牙。

Author:  CM Cheng [ 08 Mar 2004 11:51 pm ]
Post subject: 

九成九係出晒名既5125MG啦!

Image

Author:  Y C Lui [ 08 Mar 2004 11:58 pm ]
Post subject: 

CM, 你睇到幅相係唔係好驚呢。。。。Hitec 話隻膠牙係會首先掃﹐作用係保護D金屬牙﹐不過實際就完全係第回事。

Author:  CM Cheng [ 09 Mar 2004 12:11 am ]
Post subject: 

嘩!咁既理由佢都講得出口?掃膠牙保護金屬牙,咁要D金屬牙黎做乜,不如全部用膠牙賣平D!

Author:  Stanley [ 09 Mar 2004 12:39 am ]
Post subject: 

我隻MG125就係掃金屬牙都唔掃膠牙囉!金屬牙真係屎到卑,我認為係好弱既黃銅,細細力都會扭壞!

Author:  Angus [ 09 Mar 2004 12:43 am ]
Post subject: 

我剛剛完成兩隻125MG嘅run-in test。
我用兩隻一斉舉一個1kg啞呤,當舉咗250下,兩隻servo開始發暖。於是我立即cut電,過三十分鍾後再開始,今次舉慢啲就冇再發暖。Run咗十五分鍾左右,應該都算Okay。

Author:  ken [ 20 Apr 2004 11:11 am ]
Post subject:  HS 81 Servo 齒牙

昨日到星河,阿譚話有 81MG 牙賣。我話我未有 81MG servo 掃牙, 佢話可以將膠牙81變成81MG。買了兩套回家,將以前的81改成為81MG。效果很正常。

Author:  Ah Pong [ 20 Apr 2004 06:48 pm ]
Post subject: 

Dear Ken,
Please advise how much per set of the gears.

Regards, Pong.

Author:  ken [ 20 Apr 2004 10:02 pm ]
Post subject:  81MG gear

Pong,

Mr. Tam told me he give me a special price, it is $7? per set.

Ken

Page 1 of 1 All times are UTC + 8 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/