| RC Slope Soaring in Hong Kong http://www.rcsail.com/forum/ |
|
| diy材料 http://www.rcsail.com/forum/viewtopic.php?f=3&t=400 |
Page 1 of 1 |
| Author: | ss [ Tue Feb 01, 2005 7:53 pm ] |
| Post subject: | diy材料 |
見到隔離thread講平碳纖，我想開條新thread專講diy材料的，方便大家找材料，希望大家也可以分享一下. EPP 可以直接問廠家，比經中間人平一截 http://www.hangsunchemical.com/ 1200x900x50mm HKD$100左右 |
|
| Author: | Steven Kwok [ Tue Feb 01, 2005 11:54 pm ] |
| Post subject: | |
very good info. |
|
| Author: | Tsz Ming [ Wed Feb 02, 2005 1:00 am ] |
| Post subject: | |
SS Have you successful to get the EPP foam board from this supplier? How many MOQ they need? Can they delivery the EPP foam board material to Hong Kong directly? Ming Lou |
|
| Author: | ss [ Wed Feb 02, 2005 7:56 pm ] |
| Post subject: | |
佢有MOQ，夠就包送貨，唔夠就要去佢地香港廠自取 |
|
| Author: | WingDragon [ Thu Feb 03, 2005 10:37 am ] |
| Post subject: | |
Dear ss, Any ideas on the density of their EPP? 1.3lb or 1.9lb? Eventually, I can give up using pink & blue foam and shift to DIY EPP glider. It's time to think of my next project. With the tough texture of EPP, I think I could work on a 96" wingspan DIY KING Gulp. My current DIY collection consists of a 39" tailess and a 60" tailess, so next step should be over 84". 
|
|
| Author: | ss [ Tue Feb 08, 2005 5:51 pm ] |
| Post subject: | |
是1.3lb,1.9要貴70% |
|
| Page 1 of 1 | All times are UTC + 8 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|