60" wingspan with MG06 airfoil.
One 5mm plus two 4mm carbon on top.
Another 6mm x 13mm wooden stick on the bottom for support.
Just need electronic and covering to finish the Glider.
| RC Slope Soaring in Hong Kong http://www.rcsail.com/forum/ |
|
| My New DIY Project http://www.rcsail.com/forum/viewtopic.php?f=3&t=390 |
Page 1 of 1 |
| Author: | Steven Kwok [ Sat Jan 22, 2005 12:06 pm ] |
| Post subject: | My New DIY Project |
60" wingspan with MG06 airfoil. One 5mm plus two 4mm carbon on top. Another 6mm x 13mm wooden stick on the bottom for support. Just need electronic and covering to finish the Glider.
|
|
| Author: | Steven Kwok [ Mon Jan 31, 2005 12:38 am ] |
| Post subject: | finished |
very heavy at 1.5Kg, hope it can fly at this weight. |
|
| Author: | Steven Kwok [ Mon Jan 31, 2005 12:39 am ] |
| Post subject: | |
Fully covered with 2 layer of fibreglass tape and lots of reinforced fibreglass cloth. |
|
| Page 1 of 1 | All times are UTC + 8 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|