Jason WAI wrote:
昨天再去 偉高 ,幸好見到 堅哥. 才知 偉高 應該是用公制 膠縲絲, 但 偉高 無公制賣,
除左德昌外, 唔過海有無地方可以介紹......
除左德昌外, 唔過海有無地方可以介紹......
可以到五金鋪買
| RC Slope Soaring in Hong Kong http://www.rcsail.com/forum/ |
|
| 請問 滑翔翼用的 http://www.rcsail.com/forum/viewtopic.php?f=3&t=271 |
Page 1 of 1 |
| Author: | Jason WAI [ Tue Oct 05, 2004 12:55 pm ] |
| Post subject: | 請問 滑翔翼用的 |
請問 滑翔翼用的膠縲絲 何處有售 ? |
|
| Author: | donny [ Tue Oct 05, 2004 6:19 pm ] |
| Post subject: | Re: 請問 滑翔翼用的 |
上環德昌有售,不過星期三休息喎。 |
|
| Author: | hendry [ Tue Oct 05, 2004 7:25 pm ] |
| Post subject: | |
新填地街近碧街"李聯記"， 偉高，榮天、雷達行....等都有 |
|
| Author: | Jason WAI [ Wed Oct 06, 2004 1:41 pm ] |
| Post subject: | |
thanks a lot |
|
| Author: | Jason WAI [ Fri Oct 08, 2004 8:53 am ] |
| Post subject: | |
昨天在偉高買了 FunKey 膠縲絲, 雖然縲絲大小也差不多, 是1/4", 但不能放入縲絲孔.....發覺縲絲牙不一樣..... 請問 膠縲絲牙 是不是有幾種分別? |
|
| Author: | donny [ Fri Oct 08, 2004 1:13 pm ] |
| Post subject: | |
縲絲牙有粗牙同幼牙之分,亦有分公制及英制,1/4"是英制,机翼應該用4mm膠縲絲,德昌有售。 |
|
| Author: | Jason WAI [ Wed Oct 13, 2004 8:40 am ] |
| Post subject: | |
昨天再去 偉高 ,幸好見到 堅哥. 才知 偉高 應該是用公制 膠縲絲, 但 偉高 無公制賣, 除左德昌外, 唔過海有無地方可以介紹...... |
|
| Author: | MingFai [ Wed Oct 13, 2004 11:30 am ] |
| Post subject: | |
Jason WAI wrote: 昨天再去 偉高 ,幸好見到 堅哥. 才知 偉高 應該是用公制 膠縲絲, 但 偉高 無公制賣,
除左德昌外, 唔過海有無地方可以介紹...... 可以到五金鋪買
|
|
| Author: | rocky [ Wed Oct 13, 2004 11:52 am ] |
| Post subject: | |
不锈鋼唔係重好多，但係就堅好多，到唔五金店買，買時最好買0岩長度，可免則免鋸短。 |
|
| Author: | Jason WAI [ Fri Oct 15, 2004 3:58 pm ] |
| Post subject: | |
rocky wrote: 不锈鋼唔係重好多，但係就堅好多，到唔五金店買，買時最好買0岩長度，可免則免鋸短。
不锈鋼, 知道了. 明天去買. Thanks , Rocky and ming Fai |
|
| Page 1 of 1 | All times are UTC + 8 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|