除左 Stanley 掃牙個隻淨係換返齒輪外﹐其它個幾隻都係換過全新﹐仲有齊所有配件﹐ Hitec 一個仙都無收。原來網上既傳聞係真架﹗
| RC Slope Soaring in Hong Kong http://www.rcsail.com/forum/ |
|
| 呢 Hitec servo 卒之返黎啦 http://www.rcsail.com/forum/viewtopic.php?f=3&t=174 |
Page 1 of 1 |
| Author: | Y C Lui [ Thu Jun 24, 2004 9:07 pm ] |
| Post subject: | 呢 Hitec servo 卒之返黎啦 |
除左 Stanley 掃牙個隻淨係換返齒輪外﹐其它個幾隻都係換過全新﹐仲有齊所有配件﹐ Hitec 一個仙都無收。原來網上既傳聞係真架﹗
|
|
| Author: | Stanley [ Thu Jun 24, 2004 10:00 pm ] |
| Post subject: | |
嘩，咁嘅 service 又幾好喎，不過我冲有两隻掃咗牙嘅MG125噃，好唔好等埋其他朋友啲壞 servos 寄返去換過？ |
|
| Author: | Yeung [ Fri Jul 09, 2004 1:52 pm ] |
| Post subject: | 呢 Hitec servo 卒之返黎啦 |
Hi Stanley, I have 2 blend new 81MG needed to send back for services or replacement. There is tiny metallic particles moundled in the first transmission nylon gear and this jams the movement. The second servo has too tight gear smeshing which blocks neutral positioning. Are you going to be the collection point? Regards, YEUNG |
|
| Author: | Yeung [ Fri Jul 09, 2004 1:54 pm ] |
| Post subject: | 呢 Hitec servo 卒之返黎啦 |
In fact I have already sent several email to Hitec USA with photos but there isn't ant reply! |
|
| Author: | CT [ Mon Jul 26, 2004 8:15 pm ] |
| Post subject: | |
Please count me in too if that's not too much trouble. I have a stripped gear in a 645MG and a HS81 that just doesn't respond to controls. TIA. Not a member tho... does that matter? CT |
|
| Page 1 of 1 | All times are UTC + 8 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|