請問各位師父:
個FUTABA 9 CH 控就到貨,
因為之前用4 CH控, 又要另加MIXER, 都係亂撞, 撞O岩個SETTING! 雖然試O左大半個鐘頭!! 
因為個9 CH 控有埋MIXING 功能, O甘大飄既2 個SERVO 應該如何選擇接收既CH1或CH2呢???
謝謝!!!
| RC Slope Soaring in Hong Kong http://www.rcsail.com/forum/ |
|
| 如何於大飄或BEE上& http://www.rcsail.com/forum/viewtopic.php?f=3&t=141 |
Page 1 of 1 |
| Author: | David Law [ Wed Jun 09, 2004 5:52 pm ] |
| Post subject: | 如何於大飄或BEE上& |
請問各位師父: 個FUTABA 9 CH 控就到貨, 因為之前用4 CH控, 又要另加MIXER, 都係亂撞, 撞O岩個SETTING! 雖然試O左大半個鐘頭!!
因為個9 CH 控有埋MIXING 功能, O甘大飄既2 個SERVO 應該如何選擇接收既CH1或CH2呢???
謝謝!!!
|
|
| Author: | Ah Pong [ Wed Jun 09, 2004 10:54 pm ] |
| Post subject: | |
 Dear David,
no need to worry! Just plug the servos to CH1 and Ch2. Everything could be set at the site. Simply ask the master at the flying site and they will more than happy for giving a helping hand. Regards. |
|
| Page 1 of 1 | All times are UTC + 8 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|