等了幾個月，昨日收到廠方的來郵以為批MiniNYX和Shooting Star已造起，點知原來唔係，佢地話最近D造機物料價錢暴漲，要加價才可以幫我造機！
唉！
由於最近D歐羅也暴升，所以我都係決定取消訂單。
早前跟我訂了MiniNYX和Shooting的機友，對唔住啦，我幫唔到你地啦！
| RC Slope Soaring in Hong Kong http://www.rcsail.com/forum/ |
|
| 太貴了，唔再訂MiniNYX和Shooting Star http://www.rcsail.com/forum/viewtopic.php?f=3&t=1308 |
Page 1 of 1 |
| Author: | Stanley [ Tue Mar 04, 2008 10:32 pm ] |
| Post subject: | 太貴了，唔再訂MiniNYX和Shooting Star |
等了幾個月，昨日收到廠方的來郵以為批MiniNYX和Shooting Star已造起，點知原來唔係，佢地話最近D造機物料價錢暴漲，要加價才可以幫我造機！ 唉！
由於最近D歐羅也暴升，所以我都係決定取消訂單。 早前跟我訂了MiniNYX和Shooting的機友，對唔住啦，我幫唔到你地啦！
|
|
| Author: | CM Cheng [ Wed Mar 05, 2008 11:41 am ] |
| Post subject: | |
堅叔不如開發60寸mould機，益下大家 
|
|
| Author: | kin [ Wed Mar 05, 2008 4:50 pm ] |
| Post subject: | |
60"容易好多,可以考虑一下!!! |
|
| Author: | 2212kevin [ Wed Mar 05, 2008 11:08 pm ] |
| Post subject: | . |
Stanley it is really a bad news for us & now my Shooting Star...... 
|
|
| Author: | Tsz Ming [ Thu Mar 06, 2008 1:06 am ] |
| Post subject: | |
Radar remain last two I think. Tsz Ming |
|
| Author: | Ah Pong [ Fri Mar 07, 2008 1:56 pm ] |
| Post subject: | |
Ah Kin wrote: Quote: 60"容易好多,可以考虑一下!!!
Ah Kin, I've figured out the name of the new 60 inches moldies as well as its airfoil. As it will be purely Hong Kong's (HKSAR) design, it should call SAR'S. Airfoil shall use H5N1. Please don't blow its tail when you pick it up from slope. 
|
|
| Author: | kin [ Fri Mar 07, 2008 2:22 pm ] |
| Post subject: | |
就起名"雞屎" ! |
|
| Author: | Yeung [ Fri Mar 07, 2008 2:28 pm ] |
| Post subject: | |
Today's Euro exchange rate soars high at 12.XXX 
|
|
| Author: | Stanley [ Sat Jun 28, 2008 1:11 am ] |
| Post subject: | |
最近有機友問我可否再訂MiniNYX和Shooting Star，話就算貴少少都想要隻來飛下喎。以依傢的對換率計，1 euro = HK$12.3，我估計MiniNYX機價連運費要成HK$2,700左右，Shooting Star就平HK$200左右。 對我來說以這個價錢買隻60"機真是很貴，我自已一定唔會買，大陸製既3米機都是HK$4,000元左右！如果阿堅哥及早開發60"mold機，以大眾化價錢HK$1,xxx，益街方就好啦！ 不過如真係有機友接受這個價位訂機的話，我都樂意幫忙，最好超過8隻機一起訂，分擔運費才能化算。 有興趣的機友可以留言給我。 |
|
| Page 1 of 1 | All times are UTC + 8 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|