| RC Slope Soaring in Hong Kong http://www.rcsail.com/forum/ |
|
| Which plane to get http://www.rcsail.com/forum/viewtopic.php?f=3&t=1065 |
Page 1 of 1 |
| Author: | FFF [ Mon Jul 23, 2007 6:32 pm ] |
| Post subject: | Which plane to get |
Hi Just looking for some advice on plane selection, I have hreard the mini NYX is a popular choice for composite, what else is similar to this plane? Also for EPP, which is a popular plane? Many thanks Leo |
|
| Author: | K.Y.Mak [ Mon Jul 23, 2007 7:41 pm ] |
| Post subject: | Re: Which plane to get |
FFF wrote: Hi
Just looking for some advice on plane selection, I have hreard the mini NYX is a popular choice for composite, Leo So, why not get yourself a Mini-NYX ? Whatever flying style you do, the Mini-NYX will be one of the best planes you can buy. |
|
| Author: | Ah Pong [ Mon Jul 23, 2007 7:50 pm ] |
| Post subject: | |
Hi Leo, Just want to share my experience, please use reliable receiver and servos. Yesterday, I went to FNS, and met a new comer flying a composite with some unreliable gears. The centering problem of such servos made the plane so difficult to land. Bearing in mind that the safety of other by-passers is more important than the money saved from the unreliable gears. Regards, and happy soaring. Pong |
|
| Author: | FFF [ Tue Jul 24, 2007 12:50 pm ] |
| Post subject: | |
Thanks, I do definitely agreed with the "not to use bad gear" behavior, as I have lost a lovely plane once due to that reason. So where is the best place to get the mini nyx? I have seen on forum soemtime for sales, but not always available, how do I order one, and how much approx is that plane? Many thanks Leo |
|
| Author: | K.Y.Mak [ Tue Jul 24, 2007 2:52 pm ] |
| Post subject: | |
place an order with Stanley. http://www.rcsail.com/forum/viewtopic.p ... 8e68ee3169 There is one in Radar if you need one ASAP. but be ready to pay a bit more for it. |
|
| Author: | Ah Pong [ Tue Jul 24, 2007 7:39 pm ] |
| Post subject: | |
Ordering it from Stanley would take 6 months. The factory is very slow in making them. In addition, with the current high TT rate it would cost you some HK$ 2200-2300. 
Buying it from Rad?r is a bit expensive as they asking for some HK$ 3300 to 3500 (I cannot remember.) 
|
|
| Author: | FFF [ Wed Jul 25, 2007 1:42 pm ] |
| Post subject: | |
Thanks Guys Looks like I will have to wait a bit for it then. Also, does anybody heard of the FVK bandit? Does anyone owning one or owned one before, and how is it? Many thanks Leo |
|
| Page 1 of 1 | All times are UTC + 8 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|