發覺裝左個 wing joiner 後枝 wing joiner 並非係頂實隻翼既 wing joiner tube 儘頭。而係有成 +/-6mm 既位可以 tun 左 tun 右。咁樣最大既問題就係個上反角中位會偏離機身既中線。有無人知點解會咁 ﹖我以前D機都唔係咁架渦
| RC Slope Soaring in Hong Kong http://www.rcsail.com/forum/ |
|
| Aris wing joiner 長度有問題 http://www.rcsail.com/forum/viewtopic.php?f=2&t=997 |
Page 1 of 1 |
| Author: | Y C Lui [ Tue May 01, 2007 9:24 pm ] |
| Post subject: | Aris wing joiner 長度有問題 |
發覺裝左個 wing joiner 後枝 wing joiner 並非係頂實隻翼既 wing joiner tube 儘頭。而係有成 +/-6mm 既位可以 tun 左 tun 右。咁樣最大既問題就係個上反角中位會偏離機身既中線。有無人知點解會咁 ﹖我以前D機都唔係咁架渦
|
|
| Author: | Stanley [ Wed May 02, 2007 1:39 pm ] |
| Post subject: | |
?黫搰[！我估?鶶]計上的漏洞。但以我的經驗影嚮很微。你可以在條Wing Joiner上劃上直線記號，每次裝機時都在同一位置。 |
|
| Author: | Y C Lui [ Thu May 10, 2007 10:04 pm ] |
| Post subject: | |
諗左一輪決定用呢個對策 ﹕ 
|
|
| Page 1 of 1 | All times are UTC + 8 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|