RC Slope Soaring in Hong Kong
http://www.rcsail.com/forum/

Demo
http://www.rcsail.com/forum/viewtopic.php?f=2&t=90		 Page 1 of 1
Author:  Y C Lui [ Sat Apr 17, 2004 3:15 am ]
Post subject:  Demo
隻批仲未賣出﹐隻 Demo 就已經到左. 呢隻係東歐制既 F3F 機﹐翼型係 HN354, 同 New Sting 一樣。我買個隻係玻璃纖維版﹐平過 Sting 小小。下面有幾張相﹕

隻機係 Brisk III 既下一代﹐翼展 2.8m
Image

對翼分兩塊 panel, 中間駁埋﹐ 條炭通出廠時省過﹐ 插入隻翼度時既阻力好適中
Image

D alignment pin 做得好靚﹐可惜長過頭﹐搞到隻翼拍唔貼機身﹐要鋸短 D alignment pin 至得
Image

我從未見過 mold 得咁靚既 servo bay
Image

裝 Futaba S3102 servo fit 晒
Image

機翼同機身既接駁位已經預先 mold 左個 connector 位﹐易裝﹗
Image

V 尾係一件過
Image

V 尾前面用一枝炭通連接機身﹐後面再收口螺絲
Image

隻機有一條 600g 既黃銅 ballast 跟黎
Image

條 ballast 收螺絲個位設計有問題﹐又太 fit 機身﹐要用力至拉得出黎﹐唔掂﹐要改。
Image

隻機有小部份地方有瑕疵﹐呢度係 elevator
Image

呢度係 aileron, 都係小意思
Image

機頭內膽做得好靚﹐呢 servo 位 mold 好晒﹐唔駛開
Image

裝 Futaba S3102 servo 又係 fit 晒
Image

nose cone ﹐呢隻機既機身好窄﹐目的係減低風阻
Image

條 V 尾同機翼唔係絕對平行﹐不過問題唔會好大
Image
Author:  Stanley [ Sat Apr 17, 2004 11:15 pm ]
Post subject: 
Look like it is a good contender for F3F.
Did you order it directly from Wettbewerbs Modell or from a dealler, which dealler?
How much does it costs for shipment.

I am interested to know how it will compare with NYX F3F.
Will you assember the plane soon? I will have my NYX F3F next week, so may be I can get it to fly next month and pair with your Demo then.
Author:  Y C Lui [ Sat Apr 17, 2004 11:58 pm ]
Post subject: 
隻機個製作人嘍 CM 做代理﹐CM 招呼佢就訂左兩隻﹐CM 自己要左一隻炭纖版﹐我就要左隻呢隻玻璃版﹐我個隻連運費 HK$5190 找數﹐都算平。呢排好多 project: DLG﹐Winch 同補機 (上個禮拜係飛鵝山就同一日炒左隻 mini Corado 同 Shooting Star )﹐睇黎隻 Demo 都要擺一段時間。
Author:  CM Cheng [ Tue Apr 20, 2004 3:49 am ]
Post subject: 
Hello Stanley, 我已經開工砌隻 Demo 勒，如無意外應可二至三星期內完成。

砌完 Spider-X 既十字尾現在又再砌 V 尾，又發現十字尾既另一好處: V尾每片要同時負責 rudder 及 elevator，只用 rudder 或 elevator 時，servo 只行一半，亦即浪費了一半的 resolution!

YC，如果你條尾歪左，不如考慮改做十字尾，睇下十字尾係咪真係 aerodynamic 好D，以你既補機技術，分分鐘正個原廠個模 :D
Author:  Stanley [ Tue Apr 20, 2004 9:34 pm ]
Post subject: 
睇落隻Demo又平又靚，同隻NYX嘅翼形一樣，一定唔簡單。而家香港特然多咗咁多快機睇落我隻舊Sting都差唔多時候要退役了！現在唯有寄望整番好隻Trinity同你哋砌過。
Author:  CM Cheng [ Sat May 22, 2004 2:42 pm ]
Post subject: 
Hello fellow slope racers, I will order the DEMO again and if you are interested please email me ASAP. Please tell me CF or FG version and the color you like.


Image
Author:  Stanley [ Sat May 22, 2004 9:43 pm ]
Post subject: 
嘩！隻 Demo 好規喎，試飛咗未呀！曝啲料嚟聽吓。7月4日嘅比賽一定有番龍争虎鬥。
Author:  CM Cheng [ Sun May 23, 2004 12:37 am ]
Post subject: 
Stanley，你想話我隻機好"虧" (規)，定係好"靚"?

五月一日試飛左勒，仲炒埋添! 其實唔係乜大問題，只係降點 D 草短 D，又有舊好似雞蛋咁大既石仔係度，咁就冇左忽前緣勒，Kinematic urgliness 呢家野真係唔好唔信!

隻 DEMO 已補好，依家噴緊油，可能明日有得飛。
Author:  Guest [ Sun May 23, 2004 9:48 am ]
Post subject: 
Kinematic urgliness 呢家野真係唔好唔信! That's why I always fly with my very very old mini NYX, and never 噴油 on it. :D
Author:  Ah Pong [ Sun May 23, 2004 9:50 am ]
Post subject: 
Ah Pong wrote.[/quote]
Author:  Stanley [ Sun May 23, 2004 10:51 pm ]
Post subject: 
CM Cheng wrote:
Stanley，你想話我隻機好"虧" (規)，定係好"靚"?


唔好意思，當然喺話你隻機好靚 :lol: ，唔喺好虧。
試飛隻Demo之後嘅感覺如何？同你隻Brisk III或隻Spider X有何不同呢？

老實講我覺得啲機越羞就發揮得越好！我隻Sting成隻木乃伊咁，戰積都幾好呀！
Author:  CM Cheng [ Mon May 24, 2004 1:00 am ]
Post subject: 
Brisk III 易飛，用黎遊機河好開心，但係直線慢 D，佢對翼成 9% 厚，可能係原因之一，上次大金鐘俯衝時發現呢個問題 . .

Spider X 轉彎易，抽極都有，感覺非常似 MiniNYX。

隻 DEMO仲 set 緊，7月4日睇下佢點啦! (秘密武器 :twisted: :twisted: )

Stanley，有冇考慮換隻新 Sting? 如果木乃伊都被你飛到42秒，咁生勾勾既咪35秒都唔出奇? 呢個成績係維京賽一 D 都唔失禮! 快 D 整隻新 Sting，重有幾個月可以同佢溝通溝通，你都要隻 backup 架 :wink:
Author:  K.Y.Mak [ Mon May 24, 2004 9:46 pm ]
Post subject: 
CM Cheng wrote:
Stanley，有冇考慮換隻新 Sting? 如果木乃伊都被你飛到42秒，咁生勾勾既咪35秒都唔出奇? 呢個成績係維京賽一 D 都唔失禮! 快 D 整隻新 Sting，重有幾個月可以同佢溝通溝通，你都要隻 backup 架 :wink:


Stanley,
幾個月時間話長唔長,話短唔短,千棋唔好令隻新 Sting 飛到成左隻"木乃伊-#2"呀 :lol:
Author:  Stanley [ Mon May 24, 2004 10:29 pm ]
Post subject: 
邊個話我有隻新 Sting 呀！冇呀。我都喺唸抬隻木乃伊 Sting 去德國比賽咋！或這可以揾啊 Y.C. 幫忙同隻機整整容，會好睇啲嘅！本來都唔知帶多邊一隻機去做後備，剛剛睇到隻大蕉 (Trinity) 喺美國F3F賽跑出個第二，當堂對隻機啲信心又大番啲，希望喺未來幾個月操 fit 拒，攞埋去德國拼拼。
http://groups.yahoo.com/group/F3F/message/14216
啊麥你都要小心操隻 New Sting 免得隻機元氣下傷。New Sting 果然喺好機，最近在Noway嘅賽事表現得好出色。
http://www.f3x.no/f3f/2004/noropen.htm
Page 1 of 1 All times are UTC + 8 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/