RC Slope Soaring in Hong Kong http://www.rcsail.com/forum/ |
|
DSing with NYX-F3F at FNS http://www.rcsail.com/forum/viewtopic.php?f=2&t=841 |
Page 1 of 1 |
Author: | Ah Pong [ Mon Nov 13, 2006 7:41 pm ] |
Post subject: | DSing with NYX-F3F at FNS |
After sat in the ICU (intensive care unit) for 5 weeks, the NYX is reborn. The wind was strong, and I had no ballast with me! Just used the long screw as ballast: Despite the heavy repairing works, the model was quite responsive.... High speed byprass We then tried DSing: http://s8.photobucket.com/albums/a11/edmondpong/?action=view¤t=MPEG1_VCD_NTSC.flv Spare link: http://www.zippyvideos.com/7300861306275346/mpeg1_vcd_ntsc/ Regards. |
Author: | Stanley [ Tue Nov 14, 2006 11:39 am ] |
Post subject: | |
阿邦你就好啦,又得上飛鵝山玩DS,不過睇 |
Author: | Wing [ Tue Nov 14, 2006 12:41 pm ] |
Post subject: | Nice job ! |
Ah Pong wrote: :P
After sat in the ICU (intensive care unit) for 5 weeks, the NYX is reborn. Wow, looks like a brand new NYX F3F The original owner should love to see that Pong Pong any photos or tricks to share for this ICU job ? Apart from SK II rod & Cat's food can any other special tools adopted this time ? For performing DS top-stress test for NYX F3F, the best candidate should be air-con Ah Wai See if you want to let him try DS this NYX F3F for quality check |
Author: | Ah Pong [ Tue Nov 14, 2006 1:17 pm ] |
Post subject: | |
Quote: Apart from SK II rod & Cat's food can any other special tools adopted this time ?
Trick one: Use syringe for applying CA to some tricky positions. Trick two: For the paint works, use air brush. Regards, |
Author: | K.Y.Mak [ Tue Nov 21, 2006 7:30 pm ] |
Post subject: | |
[quote="Stanley"]各位機友又無興趣 |
Page 1 of 1 | All times are UTC + 8 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |