RC Slope Soaring in Hong Kong
http://www.rcsail.com/forum/

60" F3F Race this Sunday (5/11/2006)
http://www.rcsail.com/forum/viewtopic.php?f=2&t=832
Page 3 of 3

Author:  Wing [ Mon Nov 06, 2006 6:22 pm ]
Post subject: 

Hey Stanley : just a minor typo in the score sheet ! Ah Mak was flying Ocelot yesterday (same model as Angus) which performed extremely well in light lift condition with her slim body & super light configuartion :o

Like F3F Open last year, NOV seems a fortunte month for Pong Pong for demonstrating his top speed :x

Author:  Stanley [ Mon Nov 06, 2006 10:14 pm ]
Post subject: 

昨日真是我的超級黑日了,一早上到馬鞍山停車場,我架車的前後輪軩,給幾口大頭釘插穿,要立刻趕落山保

Author:  Y C Lui [ Tue Nov 07, 2006 1:16 am ]
Post subject: 

阿生為左避個傘佬﹐搞到隻 mini NYX 跌左落山﹐執唔返﹐唉....出師未捷....阿生好似有D睇唔開 …
Image


呢隻好似係冠軍機
Image


李民隻 mini NYX 好似動過大手術。 有D似鍾無艷同科學怪人
Image


Image


法國仔
Image


Image


Image


Ocelot 好靚仔
Image


Image


Donny 隻紅 Banana 好 sharp

Image


Image


Image


不過我都係最鍾意阿麥果隻充滿蒼桑感既 mini Corado
Image


Image


Image

Author:  Ah Pong [ Wed Nov 08, 2006 9:36 pm ]
Post subject: 

:P



Stanley,

Quote:
現在正稠悵如何把螺絲弄斷,然後鬆脫隻翼。請問各位仁兄有無其他可行之方法?誰人會有一把幼細的線鋸借用把螺絲鋸斷,之後再重新安裝絲模。隻機翼不能拆開,好左地方,老婆已經好不耐煩!請速幫忙解決!


Don't worry.
Send her to my ICU. I'd reserved a bed for her.

:P :P

Author:  Stanley [ Thu Nov 09, 2006 12:52 am ]
Post subject: 

Ah Pong wrote:
:P





Don't worry.
Send her to my ICU. I'd reserved a bed for her.

:P :P


Thanks Ah Pong, I will send it to your ICU if I cannot find a small saw to cut the screw this weekend.



I was just too busy to fix the plane and no time to write up the report. Now, I have giving up and here is the report.
http://www.hkrcss.org/F3F60in1105-06.html
http://www.hkrcss.org/F3F60in1105-06C.html

Author:  K.Y.Mak [ Thu Nov 09, 2006 11:49 am ]
Post subject: 

Stanley wrote:
隻機翼不能拆開,好左地方,老婆已經好不耐煩!請速幫忙解決!
:x


建議你可以"金屋藏嬌"。
租個貨倉收藏你 D 愛機吧!

買左新機冇人知,去放機又唔駛帶機出門!
一舉兩得。

Author:  Stanley [ Thu Nov 09, 2006 6:36 pm ]
Post subject: 

K.Y.Mak wrote:
Stanley wrote:
隻機翼不能拆開,好左地方,老婆已經好不耐煩!請速幫忙解決!
:x


建議你可以"金屋藏嬌"。
租個貨倉收藏你 D 愛機吧!

買左新機冇人知,去放機又唔駛帶機出門!
一舉兩得。



我現在只是在 F 階段陪徊!
http://www.rcsail.com/forum/viewtopic.php?t=836&sid=1c83a6701facab7ce576f448db5c1dfb

依你所說我咪要進入第 E 階段? :cry:

Author:  Ah Pong [ Thu Nov 09, 2006 7:12 pm ]
Post subject: 

:shock:

Quote from newspaper today:

【 本 報 訊 】 兩 批 同 屬 一 個 黑 幫 的 青 少 年 疑 因 「 眼 超 超 」 問 題 , 較 早 前 發 生 小 衝 突 後 , 前 晚 竟 互 相 「 吹 雞 」 在 粉 嶺 雍 盛 苑 大 廝 殺 , 造 成 4 人 受 傷 , 其 中 一 人 後 腦 重 創 至 今 仍 昏 迷 不 醒 。 警 方 事 後 拘 捕 7 人 , 包 括 一 名 黑 幫 小 頭 目 「 歪 文 」 , 警 方 正 追 緝 另 一 小 頭 目 「 肥 輝 」 助 查 。
大 埔 警 區 刑 事 總 督 察 XXX 形 容 : 「 根 本 好 無 聊 … … 兩 班 人 因 為 互 睥 (F3F ???) 結 怨 … … 是 一 單 由 細 變 大 的 毆 鬥 事 件 。 」
被 捕 11 人 包 括 4 名 傷 者 年 齡 由 15 至 22 歲 , 其 中 兩 人 為 中 二 及 中 四 學 生 , 各 人 涉 嫌 聚 眾 毆 打 及 意 圖 傷 人 被 扣 查 。 消 息 稱 , 被 捕 者 同 屬 上 水 「 和 勝 和 」 黑 幫 兩 支 派 大 佬 「 寸 仔 」 及 「 肥 佬 賢 」 的 門 生 , 活 躍 於 上 水 及 粉 嶺 一 帶 , 兩 人 各 有 一 得 力 助 手 歪 文 及 肥 輝 。
較 早 前 , 歪 文 及 肥 輝 的 馬 仔 在 區 內 因 眼 望 望 問 題 起 爭 執 , 兩 人 早 前 曾 發 生 打 鬥 , 由 於 彼 此 屬 同 門 , 歪 文 及 肥 輝 各 向 大 佬 請 示 , 有 人 他 們 自 己 搞 掂 , 兩 人 遂 各 自 班 馬 , 並 相 約 前 晚 7 時 在 華 心 講 數 。 歪 文 一 方 約 15 人 帶 備 武 器 往 赴 約 , 但 肥 輝 一 方 未 有 出 現 。
歪 文 一 夥 用 膠 袋 載 武 器 往 雍 盛 苑 找 肥 輝 , 不 料 反 被 對 方 約 20 人 持 木 棍 伏 擊 , 更 被 奪 去 武 器 毆 打 , 殺 聲 震 天 , 場 面 混 亂 。 警 方 接 報 到 場 毆 鬥 者 四 散 逃 去 , 遺 下 4 傷 者 送 院 , 其 中 1 名 姓 高 (16 歲 ) 少 年 頭 部 重 創 , 一 度 危 殆 , 經 急 救 才 穩 定 下 來 。


:shock: :shock:

肥 輝 and 歪 文 ??? !!!

Author:  Stanley [ Sat Nov 11, 2006 12:34 am ]
Post subject: 

[quote="Stanley"]

回到家中用盡九牛二虎之力拆螺絲,搞到條六角匙模都變形還不能把翼弄離機身。OK唯有忍痛,用電鑼

Author:  Stanley [ Thu Nov 16, 2006 8:34 pm ]
Post subject: 

Stanley wrote:
裝好隻 Prodij 試飛,唉!不知為什麼,衰運又來,隻機放出後什麼控制都沒有,眼白白看見隻機好穩定地直飛出斜坡,漫漫的降落到老遠的山下叢林!是日烈日當空,以我現時的年紀…唉!體能都無法應付數小時來回攀山越嶺的挑戰,於是毅然決定放棄。我隻忠心硬硬跟隨了我已有六七年歲月的愛機就此說聲Bye Bye,我永遠都懷念您! :cry: :cry:
:x


我隻Prodij

Author:  Ah Pong [ Thu Nov 16, 2006 10:36 pm ]
Post subject: 

:D :D

Stanley wrote:

[quote]我隻Prodij

Author:  CM Cheng [ Thu Nov 16, 2006 11:18 pm ]
Post subject: 

[quote="Stanley"]
我隻Prodij

Author:  Y C Lui [ Thu Nov 16, 2006 11:41 pm ]
Post subject: 

They say "good gliders never die, they just float away ....."

Author:  Ah Pong [ Sun Nov 19, 2006 4:18 pm ]
Post subject: 

:P :P

Stanley wrote:
[quote]唉!我投降啦,買

Author:  CM Cheng [ Sun Nov 19, 2006 5:45 pm ]
Post subject: 

阿 Stanley 老老實實,點會諗到呢D蠱惑方法 . . . :twisted:

Author:  Stanley [ Sun Nov 19, 2006 8:14 pm ]
Post subject: 

Ah Pong wrote:
The scratches on both side (marked with blue arrows) were made by your saw, not me. What I have done was simply put a small saw between the wing and the fuse, then using a drill with a screw driver head to turn the screw.


You are smart! How come I didn't think about this approach before! Thanks

Quote:
Because when I taking out the ballest, I only found one at the front!! That means you were flying with a far-forwarded C.G.. By now, you might understand why you have to walk down a hundred feet to pick up the plane.... :shock: :shock:

Anyway, you owe me a dinner !!

:P :D :P :D


Wow! I didn't know that it was head heavy, otherwise, I should have been...

OK, tell me when you would like to have the dinner.

Author:  Y C Lui [ Sun Nov 19, 2006 9:20 pm ]
Post subject: 

Stanley wrote:
tell me when you would like to have the dinner.


聽者有份呀 ﹗

Author:  Stanley [ Tue Nov 21, 2006 10:24 pm ]
Post subject: 

I have a few movies taken during the last 60" F3F race. Just do not have time to make an interesting movie of them. Anyway, here they are:

The slowest performance by Ah Pong
http://www.rcsail.com/tmp/F3F60in_Ah_Pong.mpg

Angus brand new Ocelot
http://www.rcsail.com/tmp/F3F60in_Angus.mpg

Fat Fai 60" F3F experience
http://www.rcsail.com/tmp/F3F60in_Fat_Fai.mpg

The youngest F3F pilot of the day
http://www.rcsail.com/tmp/F3F60in_WC.mpg

Page 3 of 3 All times are UTC + 8 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/