RC Slope Soaring in Hong Kong
http://www.rcsail.com/forum/

My first Bee EPP
http://www.rcsail.com/forum/viewtopic.php?f=12&t=808		 Page 1 of 1
Author:  Nelson Woo [ Sun Sep 24, 2006 11:49 pm ]
Post subject:  My first Bee EPP
第一次砌Windrider既Bee遇到不少挫折.

挫折１：
原裝Futaba s3003 servo horn太短了, 要配兩支長些的, 仲要剪剩一隻角, 有少許心痛. :?

挫折２：
跟機來的 aileron shafts 亦太短了, 接aileron的落點要扭向機身中線才能牢穩. :x

挫折３：
Aileron shafts 的白色膠帽一開盒就已經是裂開的. :cry:
Image

挫折４：
自己用力過大，把mixing control的電路板的線路拉鬆左, 要自己焊接. :oops:

挫折５：
自己太大意了，接駁電池的電線焊好後忘了套上膠紙，短路了！冒煙了！差點連機都燒了。全新的充電池報銷了。 :shock:

希望下週可以試飛成功吧.
Author:  no name [ Fri Nov 03, 2006 9:09 am ]
Post subject: 
粗心大意,不如唔好玩啦,洗洒D飛机 :evil:
Author:  Ah Pong [ Fri Nov 03, 2006 6:24 pm ]
Post subject: 
To Mr. "No Name",

Be nice please. What Nelson said, was simply sharing his experience. Nothing wrong with him.

(Should you wish to further discuss the issue, please use your real name.)

By the way, nelson, how is your Bee now?

:P :P :P
Author:  Alex SO [ Fri Nov 03, 2006 8:42 pm ]
Post subject: 
Hi Nelson！ 講 D 我舊時玩飛機嘅事蹟等大家分享吓；以前互聯網冇咁普及，砌機冇經驗又多數靠估，買咗 D 新飛機返屋企就立刻砌，如果一個唔小心整爛咗 D 零件，咁就大鑊，又要四圍揾過 D 可以代替嘅零件，會用多咗好多時間，先至可以首航。我第一次首航隻機一飛出去就番轉頭撞咗埋山，就係咁飛咗一陣就炒咗嘞，失敗感係百分之200%，不過我冇放棄，第二日修理完又試過，不過又係飛唔到喎，原因ＣＧ唔對路，比正常嘅位置後咗好多，直至係飛塲師傅梁出手教路(當時我到重未認識師傅梁)，經師傅梁教路之後就慢慢學識飛行，越飛就越ＯＫ，就係咁樣，多咗好多收獲，識咗好多飛行朋友.......。第二次砌機小心Ｄ，駁電池又會叻咗Ｄ，加埋加埋呢Ｄ有些小不快而又深克的經驗，將來一定會成功，更加對飛行有一番睇驗！
Page 1 of 1 All times are UTC + 8 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/