Hong Kong RC Sailplane Forum 香港滑翔機發燒友論壇
http://www.rcsail.com/forum/

阿蘇補 Race M
http://www.rcsail.com/forum/viewtopic.php?f=12&t=754
Page 1 of 2

Author:  Y C Lui [ 11 May 2006 08:54 pm ]
Post subject:  阿蘇補 Race M

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

未補完架﹗請密切留意補 Race M 事態發展 !

Author:  Henry Tso [ 11 May 2006 10:19 pm ]
Post subject: 

YC,

啊蘇係唔係趕住去落注,等跑完馬先再補過呀 :lol: :lol: :lol:

Henry Tso

Author:  Stanley [ 11 May 2006 10:47 pm ]
Post subject: 

嘩!阿蘇,Y.C.同你操刀補機,就真係撞多幾次都唔怕!隻機會越補越實淨架!

Y.C.倒左個模唔好浪費,不如整多幾個接筒來賣、凈D錢幫保下,話唔埋會有好多生意,可能客仔有:
阿麥、堅、Angus、Albe、黎緊既阿邦.......

Author:  Ah Pong [ 12 May 2006 12:10 am ]
Post subject: 

喂! 史丹利:

Mud你咁口臭呀!!

我上次幫你補架Aris個模仲喺我度,你放心飛啦,祝你長補長有!!

:evil: :evil: :evil:

Author:  Ah Pong [ 12 May 2006 12:14 am ]
Post subject: 

:shock: :shock: :shock:

Da Vinci Code !!

Image

:idea: :idea: :idea:

Author:  Y C Lui [ 12 May 2006 06:12 am ]
Post subject: 

係阿蘇補緊架 Race M. 唔係我呀﹗我唔賭馬既 ....

Author:  CM Cheng [ 12 May 2006 12:42 pm ]
Post subject: 

Y C Lui wrote:
係阿蘇補緊架 Race M. 唔係我呀﹗我唔賭馬既 ....


你暗示阿蘇賭馬 :)

無所謂. 都係運動 :P

Author:  Alex SO [ 12 May 2006 05:40 pm ]
Post subject: 

嘩!如果你問我要貼士,實行好似隻機咁炒硬。言歸正轉,我唔識點樣擺D相上網,揾咗呀YC幫手,將D駁機過程大公開,有好多駁機方法都係參考YC啲補機技術,同埋揾YC教路架!最堅個位都係YC兄至真。

Author:  Stanley [ 12 May 2006 05:59 pm ]
Post subject: 

阿蘇,阿邦話你

Author:  Alex SO [ 12 May 2006 08:39 pm ]
Post subject: 

嘩咁都有玄機,果真 Ah Pong 大師也!仲有冇下次比賽預測呀, :lol: :lol: :lol:

Author:  Ah Pong [ 13 May 2006 07:31 am ]
Post subject: 

:P :P

下次比賽預測:

Image

Viking 比賽預測:
Since Ah Kin crashed his RaceM last week, therefore........

Image


For myself:


Image


:idea: :idea: :idea:

Author:  CM Cheng [ 13 May 2006 08:41 am ]
Post subject: 

阿蘇:

都無人理你點補機囉 . . . :P

不如你下次搵本"蛇貓狗"墊檯啦 :lol:

Author:  Alex SO [ 13 May 2006 08:22 pm ]
Post subject: 

Quote:
不如你下次搵本"蛇貓狗"墊檯啦
呢 D 書冇喎,下次要同你哋借 D 書先得喇!我老婆叫我,記得睇下係乜報紙喎先至好用嚟墊枱喎,咪又用咗 D 特別背景喎!隻 Race M 都係時候做接駁手術,留意呢两日 YC 嘅報導啦!

Author:  Ah Pong [ 13 May 2006 09:24 pm ]
Post subject: 

:P :P :P

Quote:
呢 D 書冇喎,下次要同你哋借 D 書先得喇!我老婆叫我:


Image


:?: :!: :?: :!:

Author:  Y C Lui [ 14 May 2006 10:28 pm ]
Post subject: 

駁骨手術完成啦﹗

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Author:  Ah Pong [ 22 May 2006 06:43 pm ]
Post subject: 

Hi Ah So,

How is the progress, would like to see the outter skin's appearence.


Regards,

:P :P :P

Author:  CM Cheng [ 22 May 2006 08:34 pm ]
Post subject: 

Hi Ah So,

How is the progress? I also like to see your new photos (聽晚開六合彩呀) :P

Regards,

:twisted: :twisted: :twisted:

Author:  Alex SO [ 22 May 2006 08:44 pm ]
Post subject: 

Ah Pong Pong ! 大師,隻機身駁翻勒,都好硬淨,我唔覺意用咗支木方,朴咗個機身(補翻個度)一下,結果都冇事;隻翼仲諗緊用乜嘢方法去補,隻機身仲未打磨兼噴油,等我同隻機扮完靚靚再同大家見面 La! :lol: :lol: :lol:

Author:  Alex SO [ 22 May 2006 08:51 pm ]
Post subject: 

CM 淨係單數!串混佢,包掂。(

Author:  Ah Pong [ 22 May 2006 09:28 pm ]
Post subject: 

:P :P
CM,
Your better trust me this time. What I said had become fact.
I said Stanley's Aris would crash, it ended up crashed one day afterward.
I said a reserve would represent HK in Viking last time, Ah MAk was invited to join Viking race!
Therefore, you have to buy a mark six with the following number:

Image

Author:  Y C Lui [ 28 May 2006 10:02 pm ]
Post subject: 

開始補翼啦﹗

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Author:  Stanley [ 28 May 2006 10:43 pm ]
Post subject: 

睇唔明!可唔可以加插

Author:  Alex SO [ 29 May 2006 09:18 pm ]
Post subject: 

咁樣解話睇下Stanley明唔明白先;首先用發熱線將機翼橫切面 CUT 咗出黎,將個前弦刻劃(弧線)落D巴沙木度,就做咗一個內彎嘅木片出嚟,好似一支曲棍球棒咁嘅木片一有共四片。
然後用两支細木片將D曲棍球棒嘅木片入十字"順"固定,做出一個曲面木臺,就好似跳台外型嘅木架結構。
然後用呢個木架將炭纤布複制出一小段失去既翼型,翼面、翼底共两片翼型,(我用咗真空袋嘅技術呢複制翼型),等D青膠乾咗就可以拆模。
以下嘅工序尚未開工,將隻翼型修改至適合型狀先至放入爛咗個段機翼內,再將翼型"痴"落隻機翼缺口位度(係由翼嘅裡面"痴")然後加支2mm炭纤棒係隻翼前弦度加強硬度(←以上工序有小小秘缺),乾咗後用混合膠或青膠補落翼面度然後打磨兼噴油,起貨。

Page 1 of 2 All times are UTC + 8 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/