RC Slope Soaring in Hong Kong http://www.rcsail.com/forum/ |
|
阿蘇補 Race M http://www.rcsail.com/forum/viewtopic.php?f=12&t=754 |
Page 1 of 2 |
Author: | Y C Lui [ Thu May 11, 2006 8:54 pm ] |
Post subject: | 阿蘇補 Race M |
未補完架﹗請密切留意補 Race M 事態發展 ! |
Author: | Henry Tso [ Thu May 11, 2006 10:19 pm ] |
Post subject: | |
YC, 啊蘇係唔係趕住去落注,等跑完馬先再補過呀 Henry Tso |
Author: | Stanley [ Thu May 11, 2006 10:47 pm ] |
Post subject: | |
嘩!阿蘇,Y.C.同你操刀補機,就真係撞多幾次都唔怕!隻機會越補越實淨架! Y.C.倒左個模唔好浪費,不如整多幾個接筒來賣、凈D錢幫保下,話唔埋會有好多生意,可能客仔有: 阿麥、堅、Angus、Albe、黎緊既阿邦....... |
Author: | Ah Pong [ Fri May 12, 2006 12:10 am ] |
Post subject: | |
喂! 史丹利: Mud你咁口臭呀!! 我上次幫你補架Aris個模仲喺我度,你放心飛啦,祝你長補長有!! |
Author: | Ah Pong [ Fri May 12, 2006 12:14 am ] |
Post subject: | |
Da Vinci Code !! |
Author: | Y C Lui [ Fri May 12, 2006 6:12 am ] |
Post subject: | |
係阿蘇補緊架 Race M. 唔係我呀﹗我唔賭馬既 .... |
Author: | CM Cheng [ Fri May 12, 2006 12:42 pm ] |
Post subject: | |
Y C Lui wrote: 係阿蘇補緊架 Race M. 唔係我呀﹗我唔賭馬既 ....
你暗示阿蘇賭馬 無所謂. 都係運動 |
Author: | Alex SO [ Fri May 12, 2006 5:40 pm ] |
Post subject: | |
嘩!如果你問我要貼士,實行好似隻機咁炒硬。言歸正轉,我唔識點樣擺D相上網,揾咗呀YC幫手,將D駁機過程大公開,有好多駁機方法都係參考YC啲補機技術,同埋揾YC教路架!最堅個位都係YC兄至真。 |
Author: | Stanley [ Fri May 12, 2006 5:59 pm ] |
Post subject: | |
阿蘇,阿邦話你 |
Author: | Alex SO [ Fri May 12, 2006 8:39 pm ] |
Post subject: | |
嘩咁都有玄機,果真 Ah Pong 大師也!仲有冇下次比賽預測呀, |
Author: | Ah Pong [ Sat May 13, 2006 7:31 am ] |
Post subject: | |
下次比賽預測: Viking 比賽預測: Since Ah Kin crashed his RaceM last week, therefore........ For myself: |
Author: | CM Cheng [ Sat May 13, 2006 8:41 am ] |
Post subject: | |
阿蘇: 都無人理你點補機囉 . . . 不如你下次搵本"蛇貓狗"墊檯啦 |
Author: | Alex SO [ Sat May 13, 2006 8:22 pm ] |
Post subject: | |
Quote: 不如你下次搵本"蛇貓狗"墊檯啦 呢 D 書冇喎,下次要同你哋借 D 書先得喇!我老婆叫我,記得睇下係乜報紙喎先至好用嚟墊枱喎,咪又用咗 D 特別背景喎!隻 Race M 都係時候做接駁手術,留意呢两日 YC 嘅報導啦!
|
Author: | Ah Pong [ Sat May 13, 2006 9:24 pm ] |
Post subject: | |
Quote: 呢 D 書冇喎,下次要同你哋借 D 書先得喇!我老婆叫我:
|
Author: | Y C Lui [ Sun May 14, 2006 10:28 pm ] |
Post subject: | |
駁骨手術完成啦﹗ |
Author: | Ah Pong [ Mon May 22, 2006 6:43 pm ] |
Post subject: | |
Hi Ah So, How is the progress, would like to see the outter skin's appearence. Regards, |
Author: | CM Cheng [ Mon May 22, 2006 8:34 pm ] |
Post subject: | |
Hi Ah So, How is the progress? I also like to see your new photos (聽晚開六合彩呀) Regards, |
Author: | Alex SO [ Mon May 22, 2006 8:44 pm ] |
Post subject: | |
Ah Pong Pong ! 大師,隻機身駁翻勒,都好硬淨,我唔覺意用咗支木方,朴咗個機身(補翻個度)一下,結果都冇事;隻翼仲諗緊用乜嘢方法去補,隻機身仲未打磨兼噴油,等我同隻機扮完靚靚再同大家見面 La! |
Author: | Alex SO [ Mon May 22, 2006 8:51 pm ] |
Post subject: | |
CM 淨係單數!串混佢,包掂。( |
Author: | Ah Pong [ Mon May 22, 2006 9:28 pm ] |
Post subject: | |
CM, Your better trust me this time. What I said had become fact. I said Stanley's Aris would crash, it ended up crashed one day afterward. I said a reserve would represent HK in Viking last time, Ah MAk was invited to join Viking race! Therefore, you have to buy a mark six with the following number: |
Author: | Y C Lui [ Sun May 28, 2006 10:02 pm ] |
Post subject: | |
開始補翼啦﹗ |
Author: | Stanley [ Sun May 28, 2006 10:43 pm ] |
Post subject: | |
睇唔明!可唔可以加插 |
Author: | Alex SO [ Mon May 29, 2006 9:18 pm ] |
Post subject: | |
咁樣解話睇下Stanley明唔明白先;首先用發熱線將機翼橫切面 CUT 咗出黎,將個前弦刻劃(弧線)落D巴沙木度,就做咗一個內彎嘅木片出嚟,好似一支曲棍球棒咁嘅木片一有共四片。 然後用两支細木片將D曲棍球棒嘅木片入十字"順"固定,做出一個曲面木臺,就好似跳台外型嘅木架結構。 然後用呢個木架將炭纤布複制出一小段失去既翼型,翼面、翼底共两片翼型,(我用咗真空袋嘅技術呢複制翼型),等D青膠乾咗就可以拆模。 以下嘅工序尚未開工,將隻翼型修改至適合型狀先至放入爛咗個段機翼內,再將翼型"痴"落隻機翼缺口位度(係由翼嘅裡面"痴")然後加支2mm炭纤棒係隻翼前弦度加強硬度(←以上工序有小小秘缺),乾咗後用混合膠或青膠補落翼面度然後打磨兼噴油,起貨。 |
Page 1 of 2 | All times are UTC + 8 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |