RC Slope Soaring in Hong Kong http://www.rcsail.com/forum/ |
|
FR3 repair http://www.rcsail.com/forum/viewtopic.php?f=12&t=1736 |
Page 1 of 2 |
Author: | Stanley [ Tue Jan 12, 2010 2:25 pm ] |
Post subject: | FR3 repair |
我隻 Ceres Golf 星期日比賽表現出眾,比起隻 Ceres Lift 有過之而無不及,所以我決定砌隻 Freestyer Golf 出黎同你地拼過! 好快就會出世啦! |
Author: | K.Y.Mak [ Tue Jan 12, 2010 3:59 pm ] |
Post subject: | Re: FR3 repair |
Stanley wrote: 決定砌隻 Freestyer Golf 出黎同你地拼過!
OMG Another killer plane |
Author: | Ah Pong [ Tue Jan 12, 2010 9:37 pm ] |
Post subject: | |
唉! 唉..! 唉...! 唉....! 唉.......! |
Author: | Kolosun [ Tue Jan 12, 2010 11:16 pm ] |
Post subject: | |
傷口都好大喎? 個Golf 咪好大個囉??哈哈!! |
Author: | Stanley [ Sun Feb 14, 2010 10:15 pm ] |
Post subject: | |
我隻 Freestyler Golf 已經砌好,今個星期日比賽可以重出江湖,哈哈!佢既筋骨盡斷後重生,殺氣一定好重,小心! |
Author: | CM Cheng [ Wed Feb 17, 2010 3:01 am ] |
Post subject: | |
Kolosun wrote: 傷口都好大喎?
個Golf 咪好大個囉??哈哈!! It's a basket ball |
Author: | Stanley [ Wed Feb 17, 2010 3:45 pm ] |
Post subject: | |
Big Freestyler Golf 真係有個籃球咁大,風阻相當大,唔緊要啦,最緊要佢聽聽話話就得啦! |
Author: | CM Cheng [ Fri Feb 19, 2010 4:23 pm ] |
Post subject: | |
嘩 Stanley 你件雕塑 . . . 你知唔知有樣野叫"沙紙",各大小五金舖有售 |
Author: | Ah Pong [ Tue Sep 14, 2010 10:31 pm ] |
Post subject: | |
Recent research proved that Stanley's FR3 is the fastest !! |
Author: | CM Cheng [ Tue Sep 14, 2010 10:46 pm ] |
Post subject: | |
Ah Pong wrote: Recent research proved that Stanley's FR3 is the fastest !! This is no recent research. High school physics only |
Author: | Stanley [ Fri Sep 17, 2010 4:24 pm ] |
Post subject: | |
That's right! I certainly think my FR3 Golf can run faster than it was. It's already proved when I was in Viking Race last May. I flew my new FR3 in the first few days and found that it didn't perform to what I expected. So I switched to my beloved FR3 Golf, then the rest is history; my fastest time in Viking Race 2010 is obtained using my FR3 Golf. I am expecting to create a new personal best record using my FR3 Golf, just waiting for a good windy day! |
Author: | Ah Pong [ Fri Sep 17, 2010 10:09 pm ] |
Post subject: | |
Seems that I have to put some golf holes on my Elita then...... |
Author: | K.Y.Mak [ Fri Sep 17, 2010 11:50 pm ] |
Post subject: | |
Ah Pong wrote: :D
Seems that I have to put some golf holes on my Elita then...... Agreed ! A dent was already added to the tail of my FR3, before it's virgin flight Ha Ha Ha |
Author: | 老燦 [ Wed Nov 24, 2010 7:22 pm ] |
Post subject: | |
Author: | Stanley [ Thu Nov 25, 2010 1:22 am ] |
Post subject: | |
燦叔, 可唔可以幫我整番過 cone 呀! 我個cone爆左好似碎片砌圖咁,最好都係成個mold番出黎。 |
Author: | 老燦 [ Thu Nov 25, 2010 6:15 pm ] |
Post subject: | |
Stanley wrote: 燦叔,
可唔可以幫我整番過 cone 呀! 我個cone爆左好似碎片砌圖咁,最好都係成個mold番出黎。 好.無所謂 |
Author: | 老燦 [ Fri Nov 26, 2010 7:22 pm ] |
Post subject: | |
Author: | 老燦 [ Sat Nov 27, 2010 9:50 am ] |
Post subject: | |
Author: | 小廣 (IQ博士) [ Sat Nov 27, 2010 12:33 pm ] |
Post subject: | |
我都開始修復“車輪”翼,特別鳴謝燦長老借出機翼一對。(真係唔好意泗,比D離形濟搞到甩油,對唔住呀燦叔) |
Author: | 老燦 [ Mon Nov 29, 2010 10:27 am ] |
Post subject: | |
Author: | 老燦 [ Tue Nov 30, 2010 9:34 am ] |
Post subject: | |
Author: | Kenneth Chan [ Tue Nov 30, 2010 4:56 pm ] |
Post subject: | |
造福人群! |
Author: | K.Y.Mak [ Tue Nov 30, 2010 5:01 pm ] |
Post subject: | |
坐言起行 |
Page 1 of 2 | All times are UTC + 8 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |