Hong Kong RC Sailplane Forum 香港滑翔機發燒友論壇
http://www.rcsail.com/forum/

Aris 有待大修 ! ( 維修中 - 機身 )
http://www.rcsail.com/forum/viewtopic.php?f=12&t=1712
Page 1 of 1

Author:  K.Y.Mak [ 09 Dec 2009 02:40 pm ]
Post subject:  Aris 有待大修 ! ( 維修中 - 機身 )

上星期去MOS玩大搜查,結果在空中發現目的物:
Image

放大啲睇睇!
Image

行動片斷:
http://s31.photobucket.com/albums/c391/ ... I_0006.flv

Aris 大修,今次有排整啦 :(
Image


"MOS大搜查"之(前傳)
http://www.rcsail.com/forum/viewtopic.p ... ef789e7576

Author:  Alan389 [ 09 Dec 2009 08:42 pm ]
Post subject: 

再次恭喜你搵番愛機, 不過睇到都 "Tang" 你心痛......

Author:  K.Y.Mak [ 04 Jan 2010 12:07 pm ]
Post subject: 

開工大吉

Image

唔係呢隻壽桃! 佢只係寄居者 :wink:

Author:  K.Y.Mak [ 04 Jan 2010 12:09 pm ]
Post subject: 

一次過大修幾隻機、見者心傷 :cry:
Image

Author:  K.Y.Mak [ 04 Jan 2010 12:14 pm ]
Post subject: 

首先整隻 Aris 嘅機身,用沙紙去面油

Image

Author:  K.Y.Mak [ 04 Jan 2010 12:16 pm ]
Post subject: 

剪去斷片、加大孔洞以便從入面修理
Image

Author:  K.Y.Mak [ 04 Jan 2010 12:20 pm ]
Post subject: 

偉高買嘅 carbon rod , 好有力 :)
Image

Author:  K.Y.Mak [ 04 Jan 2010 12:22 pm ]
Post subject: 

carbon上用沙紙,最安全係加水 :o
Image

Author:  K.Y.Mak [ 04 Jan 2010 12:25 pm ]
Post subject: 

carbon rod 定位後等乾
Image

Author:  K.Y.Mak [ 04 Jan 2010 12:27 pm ]
Post subject: 

不必强化加固的位置、可用 carbon sheet
Image

Author:  K.Y.Mak [ 04 Jan 2010 12:32 pm ]
Post subject: 

配合機身圓柱體曲線,先在機身mould 一張 carbon sheet
Image
Image

Author:  K.Y.Mak [ 04 Jan 2010 12:35 pm ]
Post subject: 

按所需大小剪出,鑽洞、加線圈
Image
Image

利用地心吸力,向接面加壓
Image

Author:  K.Y.Mak [ 04 Jan 2010 12:41 pm ]
Post subject: 

用地心吸力、反向加壓,同時修補上下兩面
Image

Author:  K.Y.Mak [ 04 Jan 2010 12:45 pm ]
Post subject: 

Check 清楚機身一定要直 :!:
Image

Author:  CM Cheng [ 04 Jan 2010 01:19 pm ]
Post subject: 

著到西裝骨骨補機 . . . :shock:

Author:  Stanley [ 04 Jan 2010 05:31 pm ]
Post subject: 

CM Cheng wrote:
著到西裝骨骨補機 . . . :shock:


阿麥唔係著西裝補機,係返緊工時蛇回家睇隻機補成點! :lol: :lol:

Author:  K.Y.Mak [ 07 Jan 2010 03:08 pm ]
Post subject: 

Stanley wrote:
CM Cheng wrote:
著到西裝骨骨補機 . . . :shock:


阿麥唔係著西裝補機,係返緊工時蛇回家睇隻機補成點! :lol: :lol:


匆"蛇回家"呀 :!:

係放工回家呀 :evil:

有冇留意、頭幾張同最後嗰張 "西裝骨骨相",係同一時間影

Author:  K.Y.Mak [ 07 Jan 2010 03:32 pm ]
Post subject: 

Check 清楚機身筆直之後,就要填滿機身的狹縫啦
首先係加 carbon fiber 入 epoxy
Image

才去填狹縫
Image

Author:  K.Y.Mak [ 07 Jan 2010 03:34 pm ]
Post subject: 

用膠片壓平
Image

Author:  K.Y.Mak [ 07 Jan 2010 03:37 pm ]
Post subject: 

乾咗啦、都幾平亮 :D

未完工

Author:  K.Y.Mak [ 07 Jan 2010 03:40 pm ]
Post subject: 

要落水、打礳走狹縫外啲 carbon,以便外面再加一層 carbon sheet

Author:  Alan389 [ 07 Jan 2010 09:27 pm ]
Post subject: 

"著到西裝補機"
一睇就知好專業 :lol:

Author:  Albert [ 08 Jan 2010 01:00 am ]
Post subject: 

著西裝整機 + 絕頂修補技術, 真係能人所不能~ 嘆為觀止! :wink:

Page 1 of 1 All times are UTC + 8 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/