RC Slope Soaring in Hong Kong

A forum for rc sailplane pilots
It is currently Thu Sep 19, 2019 8:28 pm

All times are UTC + 8 hours




Post new topic Reply to topic  [ 23 posts ] 
Author Message
PostPosted: Wed Dec 09, 2009 2:40 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
上星期去MOS玩大搜查,結果在空中發現目的物:
Image

放大啲睇睇!
Image

行動片斷:
http://s31.photobucket.com/albums/c391/ ... I_0006.flv

Aris 大修,今次有排整啦 :(
Image


"MOS大搜查"之(前傳)
http://www.rcsail.com/forum/viewtopic.p ... ef789e7576


Last edited by K.Y.Mak on Mon Jan 04, 2010 2:12 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Wed Dec 09, 2009 8:42 pm 

Joined: Mon Sep 22, 2008 3:40 pm
Posts: 43
再次恭喜你搵番愛機, 不過睇到都 "Tang" 你心痛......


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 04, 2010 12:07 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
開工大吉

Image

唔係呢隻壽桃! 佢只係寄居者 :wink:


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 04, 2010 12:09 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
一次過大修幾隻機、見者心傷 :cry:
Image


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 04, 2010 12:14 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
首先整隻 Aris 嘅機身,用沙紙去面油

Image


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 04, 2010 12:16 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
剪去斷片、加大孔洞以便從入面修理
Image


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 04, 2010 12:20 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
偉高買嘅 carbon rod , 好有力 :)
Image


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 04, 2010 12:22 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
carbon上用沙紙,最安全係加水 :o
Image


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 04, 2010 12:25 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
carbon rod 定位後等乾
Image


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 04, 2010 12:27 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
不必强化加固的位置、可用 carbon sheet
Image


Last edited by K.Y.Mak on Mon Jan 04, 2010 12:42 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 04, 2010 12:32 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
配合機身圓柱體曲線,先在機身mould 一張 carbon sheet
Image
Image


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 04, 2010 12:35 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
按所需大小剪出,鑽洞、加線圈
Image
Image

利用地心吸力,向接面加壓
Image


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 04, 2010 12:41 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
用地心吸力、反向加壓,同時修補上下兩面
Image


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 04, 2010 12:45 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
Check 清楚機身一定要直 :!:
Image


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 04, 2010 1:19 pm 
User avatar

Joined: Thu Feb 26, 2004 5:08 pm
Posts: 3003
Location: Hong Kong
著到西裝骨骨補機 . . . :shock:


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 04, 2010 5:31 pm 
User avatar

Joined: Thu Feb 26, 2004 3:51 pm
Posts: 3658
Location: Hong Kong
CM Cheng wrote:
著到西裝骨骨補機 . . . :shock:


阿麥唔係著西裝補機,係返緊工時蛇回家睇隻機補成點! :lol: :lol:


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jan 07, 2010 3:08 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
Stanley wrote:
CM Cheng wrote:
著到西裝骨骨補機 . . . :shock:


阿麥唔係著西裝補機,係返緊工時蛇回家睇隻機補成點! :lol: :lol:


匆"蛇回家"呀 :!:

係放工回家呀 :evil:

有冇留意、頭幾張同最後嗰張 "西裝骨骨相",係同一時間影


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jan 07, 2010 3:32 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
Check 清楚機身筆直之後,就要填滿機身的狹縫啦
首先係加 carbon fiber 入 epoxy
Image

才去填狹縫
Image


Last edited by K.Y.Mak on Thu Jan 07, 2010 3:43 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Thu Jan 07, 2010 3:34 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
用膠片壓平
Image


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jan 07, 2010 3:37 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
乾咗啦、都幾平亮 :D

未完工


Last edited by K.Y.Mak on Thu Jan 07, 2010 3:42 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Thu Jan 07, 2010 3:40 pm 
User avatar

Joined: Thu Feb 26, 2004 7:54 pm
Posts: 1660
Location: Tai Po, HK
要落水、打礳走狹縫外啲 carbon,以便外面再加一層 carbon sheet


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jan 07, 2010 9:27 pm 

Joined: Mon Sep 22, 2008 3:40 pm
Posts: 43
"著到西裝補機"
一睇就知好專業 :lol:


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jan 08, 2010 1:00 am 
User avatar

Joined: Wed Jan 05, 2005 12:49 am
Posts: 814
著西裝整機 + 絕頂修補技術, 真係能人所不能~ 嘆為觀止! :wink:


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 23 posts ] 

All times are UTC + 8 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron

RASAIL Home

WindGURU at Ma On Shan, Clearwater Bay and Fei Ngo Shan

Powered by phpBB® Forum Software © phpBB Group