Hong Kong RC Sailplane Forum 香港滑翔機發燒友論壇
http://www.rcsail.com/forum/

New Mini Bee
http://www.rcsail.com/forum/viewtopic.php?f=1&t=94
Page 1 of 1

Author:  Tsz Ming [ 20 Apr 2004 12:11 am ]
Post subject:  New Mini Bee

Please see this new molded EPP Mini Bee flying wing as follow.

Specifications:
Wingspan: 34.5 inch

Wing area: 1.68 sq.ft.

Airflow: RSB18

Weight: 10 oz

Wing loading: 5.59oz/sq.ft.

Battery:
a. 7.2 to 9.6V battery
b. 2 to 3 cells of Lipo

Motor :
a. speed 370 with 4 inch propeller
b. GWS IPS gearbox with 8 inch propeller
c. GWS EDP-50 type motor with 3.5 inch propeller
d. Mini Brushless motor

Radio: 3 channel with elevon mixing, 5 AMP ESC

Servo: Futaba #3107 type mini servo X 2

Image
Image

Tsz Ming

Author:  Tsz Ming [ 21 Apr 2004 09:02 pm ]
Post subject: 

Image
Image
Image
Image

Author:  Guest [ 11 May 2004 07:52 am ]
Post subject: 

35 inch Too Big.

Author:  GUEST [ 11 May 2004 08:53 am ]
Post subject: 

Yes, I think ~24 inch is better

Author:  Tsz Ming [ 17 May 2004 08:10 pm ]
Post subject:  Mini Bee logo

Image

Author:  Guest [ 18 May 2004 01:27 pm ]
Post subject: 

I am waiting for below 24 inch "MICRO BEE".

Author:  Kevin YSL [ 28 May 2004 01:07 pm ]
Post subject: 

幾錢先!??同有無motor?

Author:  Tsz Ming [ 28 May 2004 01:32 pm ]
Post subject: 

Kevin

Around HK$360 included speed 370 motor and two propellers (3.5 inch and 4 inch).

Image

Image

Tsz Ming

Author:  Stanley [ 29 May 2004 12:52 am ]
Post subject: 

360 蚊包埋摩打,真係好扺。如果我唔要隻 370 摩打,可唔可以計平D添呀,因為見啊邦隻自制無碳刷摩打後,我都想自已整番隻裝係mini電Bee上。

Author:  Tsz Ming [ 29 May 2004 01:36 am ]
Post subject: 

Stanley

當然無問題啦,因個摩打有好多嘢攪,所以未掂。
如果唔要摩打的話,隨時call我交貨。
至於要減幾多錢囉...你話囉,或還是送你一打士啤槳作少少補償。
關於隻槳,有三吋半同四吋兩款任擇,暫時都試得幾好但還有一D改善空間。

子明

Author:  guest [ 01 Jun 2004 04:48 pm ]
Post subject:  摺mini bee

請問隻 mini bee 有冇 spar? root & tip 幾多寸? 本身是否分開左右兩邊翼?
因為我想整隻摺得埋o既, 放得入背包, 用膠紙或磁石駁返埋。 玩完摺埋走人。

Author:  Tsz Ming [ 01 Jun 2004 08:34 pm ]
Post subject: 

Quote:
請問隻 mini bee 有冇 spar? root & tip 幾多寸? 本身是否分開左右兩邊翼?
因為我想整隻摺得埋o既, 放得入背包, 用膠紙或磁石駁返埋。 玩完摺埋走人。


Yes, the lenght of the carbon spar is 8 inch.
No, Mini Bee is one piece design by molding.
Yes, it is possible and sound interesting!

Tsz Ming

Author:  guest [ 02 Jun 2004 03:14 pm ]
Post subject:  摺mini bee

條 spar 係咪已經 mold o左去隻機入面?唔用得唔得ga?有條 spar 係度,隻機唔摺得,要分體式,我怕駁返埋強度唔夠 :? 。 你可唔可以幫我做o下 testing 哩? :D

Author:  Tsz Ming [ 02 Jun 2004 05:51 pm ]
Post subject: 

Quote:
條 spar 係咪已經 mold o左去隻機入面?唔用得唔得ga?有條 spar 係度,隻機唔摺得,要分體式,我怕駁返埋強度唔夠 。 你可唔可以幫我做o下 testing 哩?


The spar is pre-molded inside the wing core but I think this is not a problem, because you can crop the wing to two pcs and join it back, just keep the spar inside the wing core by slide it in!

Tsz Ming

Page 1 of 1 All times are UTC + 8 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/