RC Slope Soaring in Hong Kong http://www.rcsail.com/forum/ |
|
New Mini Bee http://www.rcsail.com/forum/viewtopic.php?f=1&t=94 |
Page 1 of 1 |
Author: | Tsz Ming [ Tue Apr 20, 2004 12:11 am ] |
Post subject: | New Mini Bee |
Please see this new molded EPP Mini Bee flying wing as follow. Specifications: Wingspan: 34.5 inch Wing area: 1.68 sq.ft. Airflow: RSB18 Weight: 10 oz Wing loading: 5.59oz/sq.ft. Battery: a. 7.2 to 9.6V battery b. 2 to 3 cells of Lipo Motor : a. speed 370 with 4 inch propeller b. GWS IPS gearbox with 8 inch propeller c. GWS EDP-50 type motor with 3.5 inch propeller d. Mini Brushless motor Radio: 3 channel with elevon mixing, 5 AMP ESC Servo: Futaba #3107 type mini servo X 2 Tsz Ming |
Author: | Tsz Ming [ Wed Apr 21, 2004 9:02 pm ] |
Post subject: | |
Author: | Guest [ Tue May 11, 2004 7:52 am ] |
Post subject: | |
35 inch Too Big. |
Author: | GUEST [ Tue May 11, 2004 8:53 am ] |
Post subject: | |
Yes, I think ~24 inch is better |
Author: | Tsz Ming [ Mon May 17, 2004 8:10 pm ] |
Post subject: | Mini Bee logo |
Author: | Guest [ Tue May 18, 2004 1:27 pm ] |
Post subject: | |
I am waiting for below 24 inch "MICRO BEE". |
Author: | Kevin YSL [ Fri May 28, 2004 1:07 pm ] |
Post subject: | |
幾錢先!??同有無motor? |
Author: | Tsz Ming [ Fri May 28, 2004 1:32 pm ] |
Post subject: | |
Kevin Around HK$360 included speed 370 motor and two propellers (3.5 inch and 4 inch). Tsz Ming |
Author: | Stanley [ Sat May 29, 2004 12:52 am ] |
Post subject: | |
360 蚊包埋摩打,真係好扺。如果我唔要隻 370 摩打,可唔可以計平D添呀,因為見啊邦隻自制無碳刷摩打後,我都想自已整番隻裝係mini電Bee上。 |
Author: | Tsz Ming [ Sat May 29, 2004 1:36 am ] |
Post subject: | |
Stanley 當然無問題啦,因個摩打有好多嘢攪,所以未掂。 如果唔要摩打的話,隨時call我交貨。 至於要減幾多錢囉...你話囉,或還是送你一打士啤槳作少少補償。 關於隻槳,有三吋半同四吋兩款任擇,暫時都試得幾好但還有一D改善空間。 子明 |
Author: | guest [ Tue Jun 01, 2004 4:48 pm ] |
Post subject: | 摺mini bee |
請問隻 mini bee 有冇 spar? root & tip 幾多寸? 本身是否分開左右兩邊翼? 因為我想整隻摺得埋o既, 放得入背包, 用膠紙或磁石駁返埋。 玩完摺埋走人。 |
Author: | Tsz Ming [ Tue Jun 01, 2004 8:34 pm ] |
Post subject: | |
Quote: 請問隻 mini bee 有冇 spar? root & tip 幾多寸? 本身是否分開左右兩邊翼?
因為我想整隻摺得埋o既, 放得入背包, 用膠紙或磁石駁返埋。 玩完摺埋走人。 Yes, the lenght of the carbon spar is 8 inch. No, Mini Bee is one piece design by molding. Yes, it is possible and sound interesting! Tsz Ming |
Author: | guest [ Wed Jun 02, 2004 3:14 pm ] |
Post subject: | 摺mini bee |
條 spar 係咪已經 mold o左去隻機入面?唔用得唔得ga?有條 spar 係度,隻機唔摺得,要分體式,我怕駁返埋強度唔夠 。 你可唔可以幫我做o下 testing 哩? |
Author: | Tsz Ming [ Wed Jun 02, 2004 5:51 pm ] |
Post subject: | |
Quote: 條 spar 係咪已經 mold o左去隻機入面?唔用得唔得ga?有條 spar 係度,隻機唔摺得,要分體式,我怕駁返埋強度唔夠 。 你可唔可以幫我做o下 testing 哩?
The spar is pre-molded inside the wing core but I think this is not a problem, because you can crop the wing to two pcs and join it back, just keep the spar inside the wing core by slide it in! Tsz Ming |
Page 1 of 1 | All times are UTC + 8 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |