Hong Kong RC Sailplane Forum 香港滑翔機發燒友論壇

This forum is dedicated to r/c sailplane enthusiasts 此論壇專為遙控滑翔機發燒友而設
It is currently 18 Nov 2017 10:11 pm

All times are UTC + 8 hours




Post new topic Reply to topic  [ 14 posts ] 
Author Message
 Post subject: New Mini Bee
PostPosted: 20 Apr 2004 12:11 am 
User avatar

Joined: 01 Mar 2004 05:05 am
Posts: 359
Location: Hong Kong
Please see this new molded EPP Mini Bee flying wing as follow.

Specifications:
Wingspan: 34.5 inch

Wing area: 1.68 sq.ft.

Airflow: RSB18

Weight: 10 oz

Wing loading: 5.59oz/sq.ft.

Battery:
a. 7.2 to 9.6V battery
b. 2 to 3 cells of Lipo

Motor :
a. speed 370 with 4 inch propeller
b. GWS IPS gearbox with 8 inch propeller
c. GWS EDP-50 type motor with 3.5 inch propeller
d. Mini Brushless motor

Radio: 3 channel with elevon mixing, 5 AMP ESC

Servo: Futaba #3107 type mini servo X 2

Image
Image

Tsz Ming


Top
 Profile  
 
 Post subject:
PostPosted: 21 Apr 2004 09:02 pm 
User avatar

Joined: 01 Mar 2004 05:05 am
Posts: 359
Location: Hong Kong
Image
Image
Image
Image


Top
 Profile  
 
 Post subject:
PostPosted: 11 May 2004 07:52 am 
35 inch Too Big.


Top
  
 
 Post subject:
PostPosted: 11 May 2004 08:53 am 
Yes, I think ~24 inch is better


Top
  
 
 Post subject: Mini Bee logo
PostPosted: 17 May 2004 08:10 pm 
User avatar

Joined: 01 Mar 2004 05:05 am
Posts: 359
Location: Hong Kong
Image


Top
 Profile  
 
 Post subject:
PostPosted: 18 May 2004 01:27 pm 
I am waiting for below 24 inch "MICRO BEE".


Top
  
 
 Post subject:
PostPosted: 28 May 2004 01:07 pm 
User avatar

Joined: 02 Mar 2004 09:03 am
Posts: 35
幾錢先!??同有無motor?


Top
 Profile  
 
 Post subject:
PostPosted: 28 May 2004 01:32 pm 
User avatar

Joined: 01 Mar 2004 05:05 am
Posts: 359
Location: Hong Kong
Kevin

Around HK$360 included speed 370 motor and two propellers (3.5 inch and 4 inch).

Image

Image

Tsz Ming


Top
 Profile  
 
 Post subject:
PostPosted: 29 May 2004 12:52 am 
User avatar

Joined: 26 Feb 2004 03:51 pm
Posts: 3622
Location: Hong Kong
360 蚊包埋摩打,真係好扺。如果我唔要隻 370 摩打,可唔可以計平D添呀,因為見啊邦隻自制無碳刷摩打後,我都想自已整番隻裝係mini電Bee上。


Top
 Profile  
 
 Post subject:
PostPosted: 29 May 2004 01:36 am 
User avatar

Joined: 01 Mar 2004 05:05 am
Posts: 359
Location: Hong Kong
Stanley

當然無問題啦,因個摩打有好多嘢攪,所以未掂。
如果唔要摩打的話,隨時call我交貨。
至於要減幾多錢囉...你話囉,或還是送你一打士啤槳作少少補償。
關於隻槳,有三吋半同四吋兩款任擇,暫時都試得幾好但還有一D改善空間。

子明


Top
 Profile  
 
 Post subject: 摺mini bee
PostPosted: 01 Jun 2004 04:48 pm 
請問隻 mini bee 有冇 spar? root & tip 幾多寸? 本身是否分開左右兩邊翼?
因為我想整隻摺得埋o既, 放得入背包, 用膠紙或磁石駁返埋。 玩完摺埋走人。


Top
  
 
 Post subject:
PostPosted: 01 Jun 2004 08:34 pm 
User avatar

Joined: 01 Mar 2004 05:05 am
Posts: 359
Location: Hong Kong
Quote:
請問隻 mini bee 有冇 spar? root & tip 幾多寸? 本身是否分開左右兩邊翼?
因為我想整隻摺得埋o既, 放得入背包, 用膠紙或磁石駁返埋。 玩完摺埋走人。


Yes, the lenght of the carbon spar is 8 inch.
No, Mini Bee is one piece design by molding.
Yes, it is possible and sound interesting!

Tsz Ming


Top
 Profile  
 
 Post subject: 摺mini bee
PostPosted: 02 Jun 2004 03:14 pm 
條 spar 係咪已經 mold o左去隻機入面?唔用得唔得ga?有條 spar 係度,隻機唔摺得,要分體式,我怕駁返埋強度唔夠 :? 。 你可唔可以幫我做o下 testing 哩? :D


Top
  
 
 Post subject:
PostPosted: 02 Jun 2004 05:51 pm 
User avatar

Joined: 01 Mar 2004 05:05 am
Posts: 359
Location: Hong Kong
Quote:
條 spar 係咪已經 mold o左去隻機入面?唔用得唔得ga?有條 spar 係度,隻機唔摺得,要分體式,我怕駁返埋強度唔夠 。 你可唔可以幫我做o下 testing 哩?


The spar is pre-molded inside the wing core but I think this is not a problem, because you can crop the wing to two pcs and join it back, just keep the spar inside the wing core by slide it in!

Tsz Ming


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ] 

All times are UTC + 8 hours


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron

RCSAIL Home

WindGURU at Ma On Shan, Clearwater Bay and Fei Ngo Shan

Powered by phpBB® Forum Software © phpBB Group